Glass Door With Hing Cut-outs With AS/NZS 2208:1996 and EN12150 Certificate

Glass door with hing cut-outs with AS/NZS 2208:1996 and EN12150 certificate
20-year experience
3-15mm

-tempered, printing, painting, acid etched, drill hole

Flat Tempered glass is to heat glass up to 700 degrees and then rapidly cool down.
Features:safe glass,fragments do no harm to people; 4-5 times safer and harder;Outstanding performance in resisting thermal stress and wind-load;Bear sudden temperature change of 220 centigrade degree;Special logo and pattern can be printed on tempered glass;
Specification
Thickness: 3-19mm                             Annual Productivity: 1400,000M2
Maximum size: 2440mmX6600mm       Minimum size: 250mmX100mm

Curved Tempered glass is heated over its softening temperature, and curved to the radius that requires. By suddenly chilling it with jets of cold air, then tempered glass shaped with a radian.

Features:

has same safety and ability of anti-impact with flat tempered glass, but has a higher intensity for the wind pressure and bending than the flat tempered glass.

Specification

Curved Tempered glass

Thickness: 3.5-12mm

Maximum size: 2000mmX1000mm

Minimum size: R>=350mm

Abnormity Curved Tempered glass 

Thickness: 4-12mm

Maximum size: 2500mmX1000mm

Minimum size: R>=300mm

Annual Productivity: 20,000M2

Equipment:  US made TAMGLASS Continuous Tempering Furnace
                    Finnish made TAMGLASS Flat tempering Furnace
                    Bending and Tempering Furnace

Welcome to visit our factoy!