Effluent Color Reduction Best Quality BWD-01 Water Decoloring Agent

    Effluent Color Reduction Best Quality

BWD-01 Water Decoloring Agent

Color Removal Chemical;

Decolorant;

Decolorization Chemical

Bleaching Agent;

Dicyandiamide-formaldehyde Resin Flocculant

Textile Effluent Color Treatment

The colored effluents, generated by the industries, when left untreated, play havoc with reusable water resources. For process houses, in water scarce areas, it comes as a heaven-sent facilitating recycling of the industrial effluent into process water. BWD-01 Water Decoloring Agent is used to solve this problem.

1. BWD-01 Water Decoloring Agent is a new type of high efficient decolorizing flocculant, published in 90's, and developed with more than 10 years, with very good stability.
2. It has high color removal of dye wastewater, by providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with BWD-01 Water Decoloring Agent by a large number of hydrolysis of flocs. Can be adsorbed dye, destabilization of the snare, from water separation, so as to achieve the purpose of bleaching.
3. It is a color removal chemical, special product for de-coloring, flocculating, CODcr decreasing and other applications.
4. It is used to remove color of waste water generated by textiles process houses and dyes industries and other fields.
5. BWD-01 Water Decoloring Agent is specially working high performance with the dyeing wastewater containing the hydrophilic dyes (reactive dyes, acid dyes, disperse dyes etc.), less dosage, the color clear, fast speed, high processing liquid clarification of the settlement, but also reduce the composition of COD, improve the COD removal rate.
6. It can be used before or after the biochemical treatment, suggested to dose after the biochemical treatment, can be with low consumption, and low effect to the bacteria.
7. To reduce the costs of color wastewater treatment, suggested to use polyaluminium chloride together, can reduce the dosage of BWD-01 Water Decoloring Agent.
8. In paper making, BWD-01 Water Decoloring Agent also can be used as fixing agent in the paper processing, will be very good performance.
9. Soluble in water, safe, non-toxic, hydrolytic stability, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable and non-explosive, it can be stored at room temperature, it cannot be placed in the sun. It is slightly acidic, when skin contact, wash immediately with plenty of water.

What is BWD-01 Water Decolorant Agent Used for?

1. Mainly used for Color Removal and COD Reduction for wastewater from textile dyeing & printing mills, dyestuffs & pigment mills, ink & paper making mills.
2. Suitable to treat waste water with Reactive dye, Acid dye, Disperse dye, Direct dye, Sulphur dye, Vat dye etc..
3. Can be used in the production process of Paper & Pulp as Retention Agent.

What is the Advantage of BWD-01?

1. Strong decolorization ( 80%~99%) and removal of COD ( 50%~80%)
2. Faster sedimentation, better flocculation, fewer sludge.
3. Non-pollution(no aluminum, chlorine, heavy metal ions etc..).

Specifications:

Items:

BWD-01 Water Decoloring Agent

Appearance:

Colorless or light-color sticky liquid

Dynamic viscosity (cps,20°C):

50-250 M PA. S (20 °C )

pH (30% water solution):

 1.0~3.0

Solid content %:

≥50

Test & Application Methods:

1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9.(It is very important, higher or lower pH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. about 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is suggestion)
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result.

 Application Cases:

A. When have biological treatment first and after they make chemical treatment.

B. When the treat first by chemicals, then the usual dosages are:

1.

Test and adjustment the pH of the effluent to 8-9

2.

First we apply the PAC (contact time 3-5 min with the waste water), after then BWD-01 Water Decoloring Agent (contact time 5-10 min), and after then anionic polyacrylamide.

3.

It will give too much economy if we'll adjust the pH 8-9, otherwise the consumption of BWD-01 will be ~20% higher.

Dosage:

50-80 ppm BWD-01(raw)

80-100 ppm BWD-01(raw)

15-20ppm Polyaluminum Chloride(solid)

15 -30 ppm PAC(solid)

1 - 2 ppm Anionic polyacrylamide(solid)

1 - 2 ppm Anionic polyacrylamide(solid)

Package and Storage:

1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 30kg, 50kgs, 250kg, 1250kg , or others according to the requirements of clients.
3. Storage temperature: 5-30°C.
4. The product would show slightly stratification or appear white at low temperature. There is no negative impact on the performance after mixing up.

FAQ:

A:

1. We can prive a certain quantity of free sample.
2. Please give us your Fedex, TNT or UPS account to arrange the sample.
3. Or you can place an order to Fedex or TNT, they will arrange the courier to pick up the fre sample.

A:

    Please give the exactly quantity, packing, destination port or specs requirements. We can a               according to your exact requirements to give you the price.

A:

    It's the best way request sample from us, you test accord to our methods, and we will quote a           price for you to check the cost. After confirm all of this. You can contact our place an order.

A:

    It's no problem if you are a small wholesaler, we would like to grow up with you together.

A:

    We are pleased to be requested the application methods from you, it is very easy to use it.

A:

1. We can establish a relationship with some orders, when we trust each other enough, and you haveenough large orders, we can sit down and discuss about to be an agent of us.
2. If you have had enough customer in your area, we can start to discuss about to be an agent of us.

A:

    Yes. We can accept OEM service. Also we have provided OEM service to lots of big and famous

    companies in the order.

A:

    We can accept 500kgs of the MOQ.

A: 

    By now, we have developed our  manufacturing capability as 50MT per day, and more than

   30000MT annual export.

A:

1. Quality is the life of our company, we have been engaging in this field about 15 years, quality brings us the benifits and gives us the vitality.
2. The bulk production is the same quality as the sample we provide to you to test before the order.
3. If you still don't trust us, you can request the third part company, such as SGS, to inspect and test the bulk cargo before shipment(you should bear the inspection expense).

Our Service:

We have more than 15 year experience and more than 20 engineers for production research and after-sales service, advanced lab equipments can satisfy your testing requirements.

• VIP Service

 Dedicated Customer Service Specialist to help guiding clients to use the products.

• Customer Care

Regular detailed tracking reports keep customers updated on their application performance, to provide professional suggestions and solutions to help you get more benifits and cut down the cots.  High Efficient Water Decoloring Agent for Textile, Paper, Dyestuff Plant Water decoloring agent price

Bluwat Company Introduction:

• Bluwat Chemicals is a professional supplier of water treatment chemicals and oil field chemicals in China. We provide our customers of both traditional and innovative products to ensure optimum control in a wide variety of applications including the treatment of drinking water, wastewater, process water, and also including oil/gas drilling and oil production.

• Our core products are inorganic coagulants and organic flocculants for the treatment of water and polymer, PHPA/Polyacrylamide for oil/gas drilling and EOR (enhanced oil recovery). We also supply PAC and CMC for drilling application.

• We built our own plants for our products to supply competitive products to our customers in all over the world. Our development work emphasizes working together with our customers to have higher performance and lower dosage on chemicals.

• Our main business is for foreign market, we provide competitive products and efficient operation according to requirements from our customers, we also provide professional application support.

• We are exporting our chemicals to more than 30 countries in the world, including Europe, USA, South and Central America, South-East Asia, Middle East, CIS and etc. We have good cooperation with many chemicals companies and water treatment companies on our products in different market, and we have had good cooperation partners as agent in some important market.