Road Stabilizer Polymer High Quality to Kenya Tanzania

 Road Stabilizer Polymer High Quality to Kenya Tanzania 

We Are Talking About the Blufloc AC4581 in Soil Stabilization, Road Construction.

• Blufloc AC4581 is a chemical that can be applied to disturbed soils at construction sites to reduce erosion and improve settling of suspended sedment.
• Blufloc AC4581 increase the soil's available pore volume, thus increasing infiltration and reducing the quantity of stormwater funoff that can cause erosion. Suspended sediments from Blufloc AC4581 treated soils exhibit increased flocculation over untreated soils. The increased flocculation aids in their deposition, thus reducing stormwater runoff turbidity and improving water quantity.
• Blufloc AC4581 is polymer-based materials used to facilitate erosion control and decrease soil sealing by binding soil particles, especially clays, to hold them on site. In addition, these types of materials may also be used as a water treatment additive to remove suspended particles from runoff.
• Blufloc AC4581 : Environmentally friendly; non-toxic to plants&animals; non-crorrosive  - will not change PH of soil or water.

Suitable Applicaitons:

PAM is suitable for use on disturbed soil areas taht discharge to a sediment trap or sediment basin. PAM is typically used in conjunction with other BMPs to incease their performance.

PAM can be applied to the following areas:

1. Rough graded soil taht will be inactive for a period of time.
2. Final graded soils before applications of final stabilizations(e.g., paving, planting, mulching.)
3. Temporary haul roads piror to placement of crushed rock surfacing.
4. Compacted soil road base.
5. Constrction staging, materials storage, and layout areas.
6. Soil stockpiles.
7. Areas that will be mulched.

What is the Functional Principle of Blufloc AC4581?

• Flocculation Mechanism:  Adsorbing suspension particles, polymer chains entangle and cross-link each other to form bridging, and make flocculation structure enlarge and thicken, and has the functions of surface adsorption and electric neutralization.
• Reinforcing Mechanism:  Blufloc molecule chain and dispersed phase form bridging bond, ion bond and covalent bond to increase combination strength.

Advantages:

• Improves stability of problem soils to prevent soil detachment (i.e. prevents erosion) in the first place
• Provides quick stabilization where vegetation has yet to be established 
• Promotes flocculation (reduces settling time) of smallest particles 
• Increases soil pore volume and permeability, thus decreasing imperious cover 
• Less obtrusive than some conventional measures - doesn’t interfere with construction machinery/activity 
• Convenient and easy to apply and store along with other soil amendments (fertilizer, mulch, etc.) with conventional seeding, mulching, or irrigation equipment 
• Material is specifically designed for the soil, waters, and other on site characteristics 
• May prevent costly repair and reshaping of rilling or failing slopes

• Re-application may not be necessary for several months if treated areas are mulched 

• Reduces seed, pesticide, and fertilizer (phosphorus and nitrogen) losses that hinder vegetation establishment on site, increase costs, and promote nutrient and chemical loading offsite

• Reduces windborne dust conditions

Anionic Polyacrylamide Can be Applied to the Following Areas:

• Rough graded soils that will be inactive for a period of time.
• Final graded soils before application of final stabilization (e.g., paving, planting, mulching). 
• Temporary haul roads prior to placement of crushed rock surfacing. 
• Compacted soil road base. 
• Construction staging, materials storage, and layout areas. 
• Soil stockpiles. 
• Areas that will be mulched.

Blufloc AC4581 Can be Used in Several Forms: 

• Powder
• Powder added to water (wet, as a stock solution) 
• Emulsion
• 

Application 

Anchor in ditches / manholes / catch basins as far upstream as possible. The dissolved polyacrylamide must mix well in the moving water and have the opportunity to settle out the suspended solids.
Small Jobs: Use 1 brick / 1 acre drainage basin.
Large jobs: Calculate the number of bricks needed based on the weight of water being treated.
Recommended dose – 10 ppm. Inspect after each rain event. Normally lasts 2-4 months.

Specifications:

Appearance:

White Granule

Molecular Weight:

Very high  

Granule:

15-100Mesh

Active Content:

100%

Dissolving Time:

1.5 Hours Maximum (20°C)

Insoluble:

0.05% Maximum

Monomer Free:

0.05% Maximum

Recommendated concentration of solution:

0.1%

 25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bags

A:

1. We can prive a certain quantity of free sample.
2. Please give us your Fedex, TNT or UPS account to arrange the sample.
3. Or you can place an order to Fedex or TNT, they will arrange the courier to pick up the free sample.

A:

    Please give the exactly quantity, packing, destination port or specs requirements. We can                   according to your exact requirements to give you the price.

A:

    It's the best way request sample from us, you test accord to our methods, and we will quote a price     for you to check the cost. After confirm all of this. You can contact our place an order.

A:

    It's no problem if you are a small wholesaler, we would like to grow up with you together.

A:

    We are pleased to be requested the application methods from you, it is very easy to use it.

A:

1. We can establish a relationship with some orders, when we trust each other enough, and you haveenough large orders, we can sit down and discuss about to be an agent of us.
2. If you have had enough customer in your area, we can start to discuss about to be an agent of us.

A:

    Yes. We can accept OEM service. Also we have provided OEM service to lots of big and famous

    companies in the order.

A:

    We can accept 5000kgs of the MOQ.

A: 

    By now, we have developed our  manufacturing capability as 100MT per day, and more than

    15000MT annual export.

A:

1. Quality is the life of our company, we have been engaging in this field about 15 years, quality brings us the benifits and gives us the vitality.
2. The bulk production is the same quality as the sample we provide to you to test before the order.
3. If you still don't trust us, you can request the third part company, such as SGS, to inspect and test the bulk cargo before shipment(you should bear the inspection expense). 

Bluwat Company Introduction:

• Bluwat Chemicals is a professional supplier of water treatment chemicals and oil field chemicals in China. We provide our customers of both traditional and innovative products to ensure optimum control in a wide variety of applications including the treatment of drinking water, wastewater, process water, and also including oil/gas drilling and oil production.

• Our core products are inorganic coagulants and organic flocculants for the treatment of water and polymer, PHPA/Polyacrylamide for oil/gas drilling and EOR (enhanced oil recovery). We also supply PAC and CMC for drilling application.

• We built our own plants for our products to supply competitive products to our customers in all over the world. Our development work emphasizes working together with our customers to have higher performance and lower dosage on chemicals.

• Our main business is for foreign market, we provide competitive products and efficient operation according to requirements from our customers, we also provide professional application support.

• We are exporting our chemicals to more than 30 countries in the world, including Europe, USA, South and Central America, South-East Asia, Middle East, CIS and etc. We have good cooperation with many chemicals companies and water treatment companies on our products in different market, and we have had good cooperation partners as agent in some important market.