Contact Platform Support
Help CenterPolypropylene Fiber Basement Waterproofing Materials
Related Products
-
Synthetic Roofing Felt/breathable Waterproof Membrane for Roof, Wall/breathable Roof UnderlaymentNegotiableMOQ: 2000 Square Meters -
Synthetic Roofing Felt/Breathable Waterproof Membrane for Roof, Wall/Weather Barrier ManufacturerNegotiableMOQ: 2000 Square Meters
-
Synthetic Roofing Felt/PP&PE Nonwoven Waterproof Membrane/tile UnderlaymentUS$ 0.7 - 0.7MOQ: 500 Square Meters
-
Breathable Waterproof Fabric/ Waterproof Breathable Membrane/ Roof Underlayment for Steel RoofUS$ 0.2 - 1MOQ: 1500 Square Meters
-
Waterproof Breathable Membrane/ Breathable Waterproof Membrane/ Breathable MembraneUS$ 0.2 - 1MOQ: 1500 Square Meters
polypropylene fiber basement waterproofing materials
1) Introduction
The polymer PP/PE waterproof membrane is made by multiple-ply different materials,especially its agingand weathering resistance layer enables the membrane possess more longer effective age. It can bondwith many kinds of adhesion, firm and secure. In case of cement-base, cementations agent can be used,the cementations agent can easily enter into the non-woven felt layer, and form well-combination withcement after solidification, permanent durability.
Decorations can be done directly on the installed membrane layer by ceramic tiles,mosaic and etc, evenon the wet screed-coat. You can carry out the construction to bond the above waterproof membrane.
2) Product Features
Non-toxic, tasteless, and environment friendly;
Good aging resistant, anti-oxidation, anti-corrosion;
Excellent flexibility, high tensile strength, anti-puncture and rooting resistance;
Can be carried out construction in wet screed-coat, saving constructing time;
Easy and fast installation;
3) Application
Roofs of civil buildings;
Basements, ponds, kitchens, toilets;
Tunnels, channels, culverts, and metallurgy and chemical fields;
4) Installation Process
Checking screed-coat Substrate cleaning up Mixing cementitious agents
Putting on additional layer Base construction Laying protection layer Maintenance.
5) Technical Data:
Tensile Strength (N/CM) |
Normal temperature: > 60 ; > 60℃:30 |
Breaking Elongation % |
Normal temperature: > 400 ; > -20℃:10 |
Tear Resistance N |
> 20 |
Impermeability, 30 min no leakage |
0.3Mpa |
Low Temperature Bending ℃ |
< -20 |
Heating Shrinking (mm) |
Extension: > 2; Shrink: > 4 |
Heat Resistance (80℃×168h) |
Tensile Strength % : > 80 ; Keeping rate of adhesive breaking: > 70 |
Alkali resistance (10% ca (oh)2 solution, normal temperature ×168h)) |
Tensile Strength % : > 80 ; Keeping rate of adhesive breaking: > 80 |
Synthetic aging |
Tensile Strength % : > 80 ; Keeping rate of adhesive breaking: > 80 |
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
Water Resistant TPO PVC EPDM HDPE Waterproofing Membrane for Commercial Buildings Modern Underlayment BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Supply of Training Towers, Steel Structure Fire - Fighting Training Towers, Military Physical Training Iron Towers, Single - and Double - Window Climbing and Rope - Descending Training TowersUS$ 1000 - 1100MOQ: 5 Metric Tons
