Contact Platform Support
Help CenterAluminium Finished Bitumen Flashing Tape
Related Products
-
Bitumen Flashing TapeUS$ 2 - 10MOQ: 2000 Rolls -
Self Adhesive Aluminium Finished Bitumen Flashing TapeUS$ 2 - 10MOQ: 2000 Rolls
-
1.2/1.5/2mm Bitumen Flashing TapeUS$ 2 - 10MOQ: 2000 Rolls
-
Bitumen Flashing Tape/bitumen Sealing Tape ManufacturerUS$ 2 - 10MOQ: 2000 Rolls
-
Bitumen Flashing Tape/bitumen Tape/bitumen Sealing Tape ManufacturerUS$ 2 - 10MOQ: 2000 Rolls
Specifications
1. aluminium finished bitumen flashing tape2.Thickness: 1.0mm,1.2mm, 1.5mm, 2mm
3.width:5-100cm
aluminium finished bitumen flashing tape
Product features
1)Self adhesion without bonding agent or torch.
2)Good rubber elasticity and elongation.
3)Excellent adhesion bond
4)Good self-healing
5)Cold&easy application,no pollution
6)Corrosion-resistance / aging-resistance
7)Available for wet ground
8)Guarantee for 15years
Application guidance
1.Ensure that the surface is dry and free from dust, rust and loose materials.
2.Prime porous surface e.g. concrete and brick with a bitumen primer or black, bitumen paint, thinned with white spirit, which is allowed to dry.
3.Cut the flashing tape to the required length.
4.Peel back 5cm (approx) of the release backing paper and position carefully. Continue removing the backing paper whilst firmly placing the tape to avoid unnecessary creasing.
5.Smooth down so that the overall contact is complete, and ensure that all air bubbles are removed. Take care not to damage the surface of the tape.
6.Where tape is joined, ensure that there is an overlap of at least 1inch or 2.5cm.
7.After use release pack and store upright in cool and dry conditions.
Technical data
Property |
Data |
Test Method |
Thickness |
1.0mm, 1.2mm, 1.5mm,2.0mm |
- |
Backing type |
Aluminum foil, HDPE film |
- |
Adhesion to Primed Concrete |
>250N |
ASTM D 1000 |
Adhesion to Steel |
> 250N |
ASTM D 1000 |
Elongation % |
> 450 |
BS 2782 |
Tension N/50mm |
> 200 |
- |
Temperature Resistance |
-25°C /+90 °C |
- |
Storage
Store under cover, out of direct sunlight and protect from extreme temperature. In tropical climates the product must be stored in an air-condition environment. Shelf life is up to 12 months when stored as per recommended storage condition.
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Etfe Air Cushion Membrane Structure Roof, 1050 Pvdf Membrane Tube Truss Toll Stations, Gas Stations, and Charging Station Canopies, Ptfe for Sports Exhibition Venues, High-speed Railway Station Platforms, and Waiting HallsUS$ 61.38MOQ: 1000 Square Meters
