Contact Platform Support
Help CenterThickness 4mm SBS Bitumen Membrane
Related Products
-
Torch-on APP Bitumen Waterproof MembraneUS$ 3.5 - 5MOQ: 1000 Square Meters -
Torch Applied Membrane Waterproofing SystemUS$ 3.5 - 5MOQ: 1000 Square Meters
-
Glass Fiber Reinforced SBS Elastomeric Membrane With Sand SurfaceUS$ 3.5 - 5MOQ: 1000 Square Meters
-
Torch-on SBS Waterproof Membrane for Flat Roof/ Glass Tissue Reinforced SBS Waterproof MembraneUS$ 3.5 - 5MOQ: 1000 Square Meters
-
Roof Materials--waterproof Underlayment Below Asphalt ShingleUS$ 2.8 - 3.3MOQ: 2000 Square Meters
SBS modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates(or grains) or polythene membrane etc.
Characteristic
Good impermeability. Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.SBS modified bitumen membrane is specially being applied in the cold area with low temperature
Applicable scope
Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and damp proof, especially for the building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the Grade civil building and industrial building which has special waterproofing requirement.
Storage and transportation instructions
A,When storage and transportation, Different types and sizes of products shall be stacking separately, should not be mixed. Storage temperature should not be above 50°C, the height is not more than two layers, in the course of transportation, membrane must stand.
B,The stacking height is not more than two layers. To prevent the tilt or pressure, when necessary cover the felt fabric.
C,In normal conditions of storage and transportation, storage period is a year since the date of production
No. |
Item |
Ⅰ |
Ⅱ |
|||||||||||
PY |
G |
PY |
G |
PYG |
||||||||||
1 |
Soluble content/(g/m ²)≥ |
3cm |
2100 |
* |
||||||||||
4cm |
2900 |
* |
||||||||||||
5cm |
3500 |
|||||||||||||
Test |
* |
No flame |
* |
No flame |
* |
|||||||||
2 |
Heat resistance |
℃ |
90 |
105 |
||||||||||
≤mm |
2 |
|||||||||||||
Test |
No flow, no dripping |
|||||||||||||
3 |
Low temperature flexibility/℃ |
-20 |
-25 |
|||||||||||
No crack | ||||||||||||||
4 |
Impermeability 30 minutes |
0.3MPa |
0.2MPa |
0.3MPa |
||||||||||
5 |
Tension |
Maximum/(N/50mm) ≥ |
500 |
350 |
800 |
500 |
900 |
|||||||
Secondly-Maximum |
* |
* |
* |
* |
800 |
|||||||||
Test |
No crack, no apart |
|||||||||||||
6 |
Elongation |
Maximum/%≥ |
30 |
* |
40 |
* |
* |
|||||||
Secondly-Maximum≥ |
* |
* |
15 |
|||||||||||
7 |
Oil Leaking |
Pieces≥ |
2 |
|||||||||||
Send Inquiry to This Supplier
You May Also Like
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
CE and ASTM Self Bituminous Adhesive Waterproof Membrane for Roof, Window, Door, Road, Bridge, Ship Deck Anti Corrosion Protection Pipe TapeNegotiableMOQ: 100 Rolls
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
