PVC Waterproof Membrane
The polyvinyl-chloride (PVC) waterproofing volume material is one performance outstanding high quality, joins processing assistants and so on plasticizer, anti-ultraviolet ray medicinal preparation , anti-aged medicinal preparation, stabilizer after the PVC resin, through squeezes out the law production formation the high polymer waterproofing volume material. Because this product has used the unique product formula, the product life has far exceeded the general waterproofing material, the entire waterproofing system life is long, the roofing surpasses for 30 years, underground surpasses for 50 years, in the construction, the civil engineering obtains the widespread application.
The service life is long, bears aged, the roofing to be possible to use above 20 years, underground may reach 50 year time.
Longitudinal strength is high, the heat treatment size change is small.
Low temperature flexibility is good, the adaptation ambient temperature mobility is good.
Bears the root system permeability to be good, may make the planter roofing.
Anti-perforating and the impact resistance are good.
Constructs, the wide breadth to join, the guest conveniently to weld reliably few, reliable, and does not have the pollution.
Bears chemistry corrosiveness strongly, to be suitable the special situation.
Has the good plasticity, the comer detail processing convenience is quick.
Services conveniently, the cost is inexpensive.
The validation of artificial after 2000 hours.
Standard width 2.05m, thickness 1.2mm/1.5mm/2.0mm,standard length
No. |
Item |
L(single fiber composite) |
N(within the fabric) |
M(no compound layer) |
||||
Ⅰ |
Ⅱ |
Ⅰ |
Ⅱ |
Ⅰ |
Ⅱ |
|||
1 |
*Tension N/cm≥ |
100 |
160 |
*8.0 |
*12.0 |
100 |
160 |
|
2 |
Fracture elongation %≥ |
150 |
200 |
200 |
200 |
150 |
200 |
|
3 |
Measurement changing at heating %≤ |
1.5 |
1.0 |
3.0 |
2.0 |
1.5 |
1.0 |
|
4 |
Cold bending |
-20℃no leaking |
-25℃no leaking |
-20℃no leaking |
-25℃no leaking |
-20℃no leaking |
-25℃no leaking |
|
5 |
Perforation resistance |
Water impermeability |
Water impermeability |
Water impermeability |
||||
6 |
Water impermeability |
Water impermeability |
Water impermeability |
Water impermeability |
||||
7 |
Bonding property with cutting(N/mm) ≥ |
3.0/breaking membrane |
3.0/breaking membrane |
3.0/breaking membrane |
||||
8 |
Hot air ageing |
Appearance |
No craze, no bubble, no cohering, hole |
No craze, no bubble, no cohering, hole |
No craze, no bubble, no cohering, hole |
|||
Tension changing% |
±25 |
±20 |
±25 |
±20 |
±25 |
±20 |
||
Elongation changing rate% | ||||||||
9 |
|
Cold bending% |
-15℃no leaking |
-20℃no leaking |
-15℃no leaking |
-20℃no leaking |
-15℃no leaking |
-20℃no leaking |
Tension strength% |
±25 |
±20 |
±25 |
±20 |
±25 |
±20 |
||
Elongation changing rate% | ||||||||
Cold bending% |
-15℃no leaking |
-15℃no leaking |
-15℃no leaking ±25 |
-20℃no leaking ±20 |
-15℃no leaking ±25 |
-20℃no leaking ±20 |
||
10 |
Phytotrons accelerating ageing |
Tension strength% |
±25 |
±20 |
||||
Elongation changing rate% | ||||||||
Cold bending% |
-15℃no leaking |
-20℃no leaking |
-15℃no leaking |
-20℃no leaking |
-15℃no leaking |
-20℃no leaking |
||
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces







