OEM packaging auto putty for car body repair

OEM packaging auto putty for car body repair

Auto putty (car body filler) is a must-have car care product for repairing dents and pinholes in car body. This small pack is meant for DIY repair. Shin Dorn offers filling and packaging services for your professional auto putty products.

OEM Services included:

- Auto putty filling in aluminum collapsible tubes.

- Private label retail packaging services according to client’s art design.

- Minimum order quantity as small as 5,000 packs.

Tube Capacity:

15 gram, 30 gram, 60 gram, 200 gram, 450 gram, etc.

Minimum Order Quantity:

5,000 packs per variant

Delivery:

30 days after confirming order

Company Certificates:

ISO9001:2008 Quality Management System;

ISO14001:2004 Environmental Management System

MAIN FEATURES:
Easy to spread and easy to work on.
Fast dry and smooth.
Superior adhesion on metallic surfaces.
Most suitable as base coat for acrylic lacquer.
Leaves no trace of putty marks.

DIRECTIONS:
1.Remove dirt, oil and grease from the area to be repaired. Keep dry.
2.Apply a thin layer of putty using a plastic spreader.
3. Allow to dry for 15 to 20 minutes. Sand with 320-400 grit sandpaper to obtain even surface.
4.Repeat step 2 and 3 if necessary.
5. Wash hands and clean application tools.

CAUTION:
Flammable liquid and vapor. Keep away from sources of heat, flames, sparks, ignition and static electricity. In case of fire, use water spray, foam, dry chemical or CO2.
Vapor harmful. Apply only where there is ventilation.
Irritating to eyes, skin, nose and throat. Can cause nausea, headaches an dizziness. In case of contact with eyes, flush with plenty of cool water and consult physician immediately.
Do not swallow. If swallowed, do not induce vomiting and consult physician immediately.
Dispose of waste and excess material according to Federal, State and local regulations.
Keep out of reach of children.