Dual-springs Injector Tester--PDQ-400-24
Specifications
1.special machine for dual-spring injectors2.fuel pressure:0~45Mpa
3.overall dimension:600*450*400
4.weight:25kg
PDQ400 double springs nozzle tester:
PDQ-400 Dual-Spring nozzle tester is the injector tester special for the dual-spring injectors, with the two pressure gauge to show the pressure of each spring.
Product advantages:
1. Equipment with a manometric gauge for internal pressure regulation
2. Digital display permits to calibrate the injector opening pressure
3. One shot and continuous spraying test
4. Rate of oil pressure and air pressure is 100:1
5.electronic power
Technical parameters:
Voltage of Power supply |
Input air pressure |
Fuel pressure: |
Volume of oil tank |
,Overall dimension(MM) |
Net weight(KG) |
AC220V±20% 50HZ |
0.6~0.8MPa |
0~45MPa |
500ML |
600×450×400 |
25KG |

Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Laser Shaft Alignment Tool Heat Press Laser AlignmentNegotiableMOQ: 100 Pieces
-
10kn Tensile Strength Measuring Testing Machines, Equipment Laboratory With Side-Action GripUS$ 3000 - 10000MOQ: 1 Set
-
Near Infrared Food Ingredient AnalyzerUS$ 11000 - 15000MOQ: 1 Unit
-
HST Spring Dyno Friction Leakage Fatigue Testing MachineUS$ 5000 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
SKF TKSA 31 Basic Wired Laser Shaft Alignment ToolNegotiableMOQ: 100 Pieces
-
Large Frame Double Test Spaces Universal Electronic Tensile Compression Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
Near Infrared Spectroscopy AnalyzerUS$ 11000 - 15000MOQ: 1 Unit
-
Charpy V-notch Impact Verification Specimens Toughness Testing MachineUS$ 3000 - 6000MOQ: 1 Set