diesel injector tester of PS400A

plastic box

Specifications

 PS400A is a kind of economical and practical tools with such qualities as following:

 Function:

1.adjust the injection pressure.

2.calibrate the atomizing quality.

3.modulate the injection angle

4.check the sealing of the needle valve

Characteristic:

1.simple structure and smart tseting

2.excellent power

3. stable andoutstanding performance.

 MAIN TACHNICAL PARAMETERS:

Operation and adjustment of the nozzle tester.

1. Fix the tester on stable work-table by using four holes of the base plat.

2. Working environment must be clean, so must operator’s hands and clothes must be clean. No operating out of the room is allowed.

3. Precipitate light -10diesel over hours, Filter it through strainer, Then put the filtered diesel into tank. Don’t put into it with unqualified diesel.

4. Testing of injection pressure of injector assembly.

Turn the injector assembly tested onto the nozzle joint tightly with high pressure profect than do the experiment and adjestment of pumping fuel.When

Pumping fuel,watch the reading on the pressure     at the same

Time ,compare it with the specified pressure ranges of the injector assembly to

See if it is normal.If the presure is too high or too low, adjust the pressure

Spring of injector assembly.

5. Adjustment of ijecting angle

This kind of nozzle tester is an ideal helper in your testing work, sold to many countries, winning much popularity and praize.We believe it can offer you a satisfied experience !