PQ1000 Common Rail Injector Test Bench
Specifications
test bench1.High pressure 0-1980bar
2. Check the injector starting pressure
test bench
Main Voltage(Vac) | 220V |
Main Frequency(Hz) | 50/60 |
Max Filling Volume per Tank(lit./gal) | 2 |
Input System pressure(bar/psi) | 0-10/0-145 |
System Build-up Pressure(bar/psi) | 1-1800bar/0-26100 psi |
It is used to test the common rail injector,and it also can clean the common rail injector by Ultrasonic Cleaning Instrument.
Technical data:
1.High pressure 0-1800bar
2. Check the injector starting pressure
3.Assessment of the injector spray fog quality
4. Inspeciton of the injector spray oil range
5.Check of the injector seal and angel
6.Check of the injector oil flow
7.The machine has fog dissipation convulsion device to improve the work condition.
8.It has the two garde filter to ensure the cleanliness of test.
9.The parameter of common rail injector ( fuel spray counts, frquency, pulse width, pressure etc..)
can be set willfully.
10. it also can clean the common rail injector by Ultrasonic Cleaning Instrument
Send Inquiry to This Supplier
You May Also Like
-
Industrial Temperature Humidity TransmitterUS$ 150 - 250MOQ: 1 Unit
-
8 Channels TCP/IP Protocol Temperature Data LoggerUS$ 750 - 800MOQ: 1 Piece
-
Handhold Single Gas Detector Design and ProduceNegotiableMOQ: 1 Set
-
Eaton Residual Current Device PFIM-40/2/003NegotiableMOQ: 1 Piece
-
Plunger Hodometer in Diesel Fuel Pump-2US$ 10 - 30MOQ: 1 Piece
-
XK-GCZD2 Industrial Automation Training Cabinet (virtual Load)US$ 100 - 5,000MOQ: 1 Set
-
Sandline DepthometerUS$ 300 - 1,000MOQ: 1 Set
-
Shore Hardness Tester Test Stand AMNegotiableMOQ: 1 Piece
-
Humidity & Temperature Meter HM580NegotiableMOQ: 10 Pieces
-
Impulse Current GeneratorNegotiableMOQ: 1 Piece