Mineral Film Bitumen Waterproof Membrane For Building Roofing/underground/bridge /tunnel/pool/parking
SBS(Styrene Butadiene Styrene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward facewith fine sands, mineral slates (or grains) or polythene membrane, etc.
APP The products are made by soaking the base thermoplastics (such as a tactic polypropylene-APP,APAO.APAL) modified bitumen, then covering double faces with elastomeric (SBS)or thermoplastics (APP,APAO,APAL)modified bitumen, and last finishing the upward face with fine sands, mineral slates or polythene membrane etc. While downward face with fine sands or polythene membrane, It has good waterproofing and ageing-resistance function, not flowing at highest temperature and no crack at lowest temperature; easy application, no pollution, and long service life, etc .APP modified bitumen waterproof membrane is specially suitable to the building waterproofing in cold area and to the buildings of changeable constructions, while APP specially suitable to high temperature and strong sun-shining.
2. Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.
3. Good performance in anti-puncture, anti-broken, anti-resistance, anti-erosion, anti-mildew, anti-weathering.
4. Construction is convenient, the melt method can operate in four seasons, joints are reliable
5. It has good waterproofing and ageing-resistance function, not flowing at highest temperature and no crack at lowest temperature; no pollution, and long service life, etc.
1). Roof and underground in industrial and civil buildings;
2). bridge, subway, tunnel, swimming pool, etc.
3). Waste landfill, sewage plant, irrigation system, etc.
SBS modified bitumen membrane is specially applied in the cold area with low temperature.
APP modified bitumen membrane is specially applied in the hot area with high temperature.
Why trust us?
2.In the normal storage, transport conditions, storage period since the production date for a year.
④ Push the heated membrane forward on primer, make sure overlap area no less than 10cm.
⑤ Compact overlaps by a roller, firm and secure.
Attentions
Construction shall not be carried out in rain, snow or over 5 degree wind weather
Safety protective facilities shall be well-equipped, and
There shall be sufficient safety protective facilities in construction site, firefighting equipment shall be placed as per stipulations.
We will be at your service immediately once you submit your requirements online to our email. We are here to expand your business & accomplish your business goals.
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Etfe Air Cushion Membrane Structure Roof, 1050 Pvdf Membrane Tube Truss Toll Stations, Gas Stations, and Charging Station Canopies, Ptfe for Sports Exhibition Venues, High-speed Railway Station Platforms, and Waiting HallsUS$ 61.38MOQ: 1000 Square Meters







