High quality ABS filament is available in a wide range of colors and special properties. ABS 3D printing filament has been used in the FDM printing industry for many years in the professional 3D printing market and with the upspring of low-cost hobbyist 3D printers the ABS filament has fast proven to be a popular choice due to the ease of printing and impact resistance of the plastic.Printing with ABS filament is fairly straight forward although compared with PLA a heated print platform is required. Due to differences in cooling of the material while printing the layers has a tendency to bend upwards leaving the print platform (also known as warping).

This ABS 1.75mm 3D printing filament compatible with most 3D printer who using 1.75mm 3D printer filament, such as makerbot 3D printer, UP 3D printer, Solidoodle 3D printer, Afinia 3D printer etc. For the printer has key lock like Cubify 3D printer is not recommended. The idea extruding temperature can refer the following specification

Description:

3D Printer Filament 1.75mm ABS

Size:1.75mm±0.05mm

Printing Temperature: 230 - 270° C

Package Included:

10Meters/string/bag ABS Filament 1.75mm

Color(multicolors): white, black, transparent, red, green, yellow, blue, orange, purple, pink, grey, silver, gold, coffee, water-blue.....etc.

1. High strength, good toughness;

2.Density is small, when printing larger volume model lighter, save money;

3.Cost-effective, can be processed in wide range temperature;

4.ABS softer than PLA;

5.To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc;

6.No  Bubble.

Quality control:

1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest REACH certificate.

2.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.

3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it.

4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.

Products Picture: