SANPU CE ROHS 110v waterproof 12v 100w power supply module

Specifications

12v 100w power supply module
Certificates: ROHS CE
2 years warranty
Efficiency: 87%
International AC input

 Features:

1. 12v 100w  power supply module .

2. The product consists of indoor type and outdoor type.

3. Convenient wiring.

4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .

5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.

6. Quality assurance: 2 years warranty.

7 High efficiency .

8.International AC input .

9.Built-in EMI fiter .

10.100% full load burn-in test .

LP100-W1V
MODEL		12V 100W	15V 100W	24V 100W	48V100W
OUTPUT	DC VOLTAGE	12V	15V	24V	48V
	RATED CURRENT	8.5A	6.7A	4.2A	2.0A
	CURRENT RANGE	0~8.5A	0~6.7A	0~4.2A	0~2.0A
	RATED POWER	100W	100W	100W	100W
	RIPPLE& NOISE (MAX.)NOTE2	100mV	100mV	150mV	150mV
	VOLTAGE TOLERANCENOTE3	±1%	±1%	±1%	±1%
	SETUP , RISE TIME	200ms/220VAC 100ms/220VAC
	HOLD UP TIME(Typ.)	30ms/VAC
INPUT	VOLTAGE RANGE	85~264VAC
	FREQUENCY RANGE	47~63Hz
	POWER FACTOR(Typ.)	PF>0.6/220VAC
	EFFICIENCY(Typ.)	85%	85%	87%	87%
	AC CURRENT(Typ.)	1.8a/110V,1A/230V
	INRUSH CURRENT(Typ.)	cold start 40A/230V
	short circiut	protection type: recovers automatically after fault condition is removed
PROTECTION	Over load	115~135% hiccup mode, auto-recovery
	over temp	≥85%°C cut off the output, auto-recovery
ENVIRONMENT	WORKING TEMP	-20°C~+60°C(no frost)
	WORKING HUMIDITY	20%~90%RH
	STORAGE TEMP , HUMIDITY	–40°C~85°C/10%~95%RH
SAFETY &EMC	SAFETY STANDARDS	CE ROHS IP67
	WITHSTAND VOLTAGE	I/P-O/P: 1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min
	EMC Test Standards	EN55015:2006; EN61547:1995+A1:2000;EN61000-3-2:2006
		EN61000-3-3:1995+A2:2005;EN61347-3-13:2006
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.

 

Introduction

 

Certificates

 

Packing

 

Logistics&Payment