1/3'' Premium Charging Hose PR2218
Specifications
W.P./B.P.:600psi-3000psi72'' (180cm)
3/8''SAE or 1/4''SAE
3-Pack R, Y, B
1/4'' Premium Charging Hose for R-410A PR2214
W.P./B.P.:600psi-3000psi
72'' (180cm)
3/8''SAE or 1/4''SAE
3-Pack R, Y, B
NOTE: Please indicate the length of the hose(90cm, 120cm, 150cm or 180cm)
Please indicate the size of the hose connector(1/4SAE, 1/2ACME or others)
1/4'' Flexible Hoses |
3/8'' Flexible Hoses |
1/2'' and 5/8'' Flexible Hoses |
|
Easily connects to 1/4'' male flare access fittings on system |
Evacuates and charges 4 times faster than 1/4'' hose |
1 Evacuates and charges 8 times faster than 1/4'' hose 2 Allows you to pull a deeper vacuum 3 More efficient job of removing moisture and contaminants from the system |
|
1/4'' Standard Charging Hose |
1/4'' Premium Charging Hose |
3/8'' Charging Hose |
1/2'' and 5/8'' Charging Hose |
|
1 All-weather flexible 2 Dependable 3 Adjust-a-valve opener Valve core depressor allows you to easily open all troublesome, out of tolerance Schrader valves |
1 Adjust-a-valve opener Valve core depressor allows you to easily open all troublesome, out of tolerance Schrader valves 2 Double barrier protection Moisture barrier provides improved resistance to moisture migration which contaminates expensive refrigerants 3 Rubber layer for permeation, braid for strength, and outer cover for protection |
1 Double barrier protection Moisture barrier provides improved resistance to moisture migration which contaminates expensive refrigerants 2 Higher working pressure |
1 Double barrier protection Moisture barrier provides improved resistance to moisture migration which contaminates expensive refrigerants 2 Larger ID reduces vacuum time substantially cover 1/4'' or 3/8'' hose, allows techs to pull a faster vacuum 3 Faster refrigerant transfer and faster charging on large systems 4 Wide selection of fittings are available |
Temperature: -20F to 180F(-28.8C to 82.2C) |
Temperature: -20F to 200F(-28.8C to 93.3C) |
||
Burst: 2500psi (172bar) |
Burst: 4000psi (276bar) |
Burst: 3000psi (207bar) |
|
Working: 500psi (34 bar) |
Working: 800psi (55bar) |
Working: 600psi (41bar) |
|
Safety Factor: 5 to 1 | |||
Available Length: 12 inches to 100 feet (12'', 24'', 36'', 48'', 60'', 72'', 96'', 10', 12', 25', 50', 75', 100') | |||
|
Remark 1 For standard charging hose, W.P./B.P.: 600psi-3000psi is available 2 For 3/8'', 1/2'', 5/8'' charging hose, W.P./B.P.: 800psi-4000psi or W.P./B.P.: 500psi-3000psi are available 3 For vacuum hose, 36'' hose will pull to 25 Microns and lower, hoses longer than 8’ not recommended for evacuation | |||
SAMPLE TEST:
Send Inquiry to This Supplier
You May Also Like
-
Flexible Silicone Rubber Hose Tube Pipe Radiator Silicone Tube Silicone Hose SRTUS$ 52.7 - 68.6MOQ: 1 Piece
-
CT-360A CT-360 Manifold Gauge Refrigerant Charging Hose Air Conditioner Flexible Hose R22 R410 R134A Charging HoseNegotiableMOQ: 1
-
Cow Mat Stable Eva Horse MatUS$ 13.5 - 35.4MOQ: 300 Pieces
-
Hydraulic Steel Wire Spiral Reinforced Industrial Rubber Hose From ChinaUS$ 3 - 10MOQ: 100 Meters
-
Hot Seal Pneumatic Braided Reinforced Polyurethane High Pressure Flexible Air Hose PU TubeUS$ 0.1 - 10MOQ: 1000 Pieces
-
Bungee Cord Set,cord Set,car ProductsNegotiableMOQ: 3000 Pieces
-
NBR(nitrile Rubber Buna) for Agricultural Machinery Parts Wheel Hub O-ringUS$ 1 - 3MOQ: 1 Ton
-
2014 High Quality Expandable Flexible Water Garden Hose(GH01)NegotiableMOQ: 1000 Pieces
-
2015 Hot Sell Artificial Latex Expandable Hose Pipe 550107US$ 22 - 48MOQ: 1000 Pieces
-
Acetylene Twin Welding Welder Hose 200PSIUS$ 1.2 - 5MOQ: 1000 Pieces

