Contact Platform Support
Help CenterPP Monofilament
Related Products
-
Concrete Fiber for AdmixtureUS$ 1.8 - 3.6MOQ: 500 Kilograms -
Concrete Additive of Polyester FiberUS$ 1.8 - 2.6MOQ: 1000 Kilograms
-
Polyester FiberUS$ 1.8 - 2.6MOQ: 1000 Kilograms
-
Synthetic Fiber for Concrete ReinforcementUS$ 1.8 - 3.6MOQ: 500 Kilograms
-
Plastic Fiber for Construction ConcreteUS$ 1.8 - 3.6MOQ: 500 Kilograms
pp monofilament form
FUNCTION:
Resist to shrink & crack
Increase seepage resistance
Increase friction resistance
Increase freezing & thawing resistance
Improve tendons protection
Replace steel net (using in plastering)
Prevent mortar split and crackle expansion
Increase impact resistance and peeling resistance
FEATURE:
- Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively
- Easy to be used: No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.
- It with fine economic property: The equivalent diameter of PP monofilament is only φ 0.03mm, so the ratio of diameter and surface area is high and on the basis of crack resistance, it can reduce the amount (to about 0.6kg/m 3 ).
- Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.
- It with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
APPLYING INSTRUCTION:
A). Compound Amount. To resist the common cracks on surfaces, 0.6kg/m3 fibers to cement paint is enough, and for reinforced application 0.9-1kg/m3 is enough.
B). Stirring requirement. The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.
SUITABLE PROJECT:
A). Be suitable for the water–proof layer, floor, inner &outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
D). Be suitable for any mortar projects and fine aggregate concrete projects.
SPECIFICATION:
Raw Material---------------Polypropylene
Crack Elongation----------15-20%
Fiber Type------------------monofilament
Fiber Dia.--------------------0.03+/-0.005mm
Melting Point(°C)----------160—170
Density(g/cm3)--------------0.91
Acid &Alkali Resistance---Strong
Tensile Strength (MPa)----500Mpa min.
Length: 6mm/12mm/19mm etc..
Packing: 0.6kgs or 0.9kgs per bag, 18kgs per carton.
Quantity: 400CTNS/20`FCL without pallet
828CTNS/40`FCL without pallet
980CTNS/40`HQ without pallet.
Send Inquiry to This Supplier
You May Also Like
-
Geotechnical Composite MaterialNegotiableMOQ: 2500 Rolls
-
Chair Mat Clear Vinyl 36 X 48 Cleated For CarpetUS$ 1 - 20MOQ: 1500 Pieces
-
Low Density and High Porosity Light Weight Clay AggregateUS$ 60 - 160MOQ: 10 Kilograms
-
Erosion and Sediment Control Silt FencingUS$ 0.1 - 1MOQ: 1 Ton
-
Seepy Material New Kind of Concrete Pervious ConcreteUS$ 1,600 - 1,700MOQ: 1 Ton
-
DIAPHRAGM WALL GRAB TEETH 25RC12 Grab Teeth Match Bauer Gb50s Hydraulic Diaphragm WallUS$ 8 - 10MOQ: 1 Piece
-
Hdpe Drainage Board, Plastic Drainage Board for Basement Roof, Pressure-resistant and Anti-permeation Water MaterialUS$ 1.23MOQ: 1 Square Meter
-
Cement Blanket 10mm Thick Weighing 12.5kg 2 Meters Wide and 50 Meters Long Concrete BlanketNegotiableMOQ: 1000 Square Meters
-
Erosion Control Mat , Rainscreen Mat , Composite Drainage MatUS$ 1.0 - 5.0MOQ: 1000 Square Meters
-
Waterproof Earthwork Geosynthetic Clay Liner Bentonite Swelling Waterproof Membrane Bentonite Geotextile Cover for LandfillsNegotiableMOQ: 1000 Square Meters
