Contact Platform Support
Help Centerthe Fiber for Reinforceing the Concrete, PP Fiber Bunchy Form
Related Products
-
PP Fiber MeshUS$ 2 - 2.7MOQ: 500 Kilograms -
PP Fibre Undee Form, Replace Steel FiberUS$ 2.4 - 3MOQ: 500 Kilograms
-
Concrete Reinforcing PAN Fiber, Polyacrylonitrile FiberUS$ 1.9 - 2.2MOQ: 500 Kilograms
-
Concrete Fiber, PP Fiber Bunchy Form 54mmUS$ 2.6 - 3.2MOQ: 500 Kilograms
-
PAN FiberUS$ 1.8 - 2.3MOQ: 500 Kilograms
PP fiber Twisted Bunchy Form
1. This fibre is used to instead of steel fiber for reinforcement to cement concrete. Compared with steel fiber,
it has the advantage of easy dispersing and blending, no damage to the mixing equipments, etc
2. The rigid polymer fibre is used polypropylene as its raw material, produced the rough surface treatment by
special parallel thread extruding & twisting process. It has high break strength, better dispersion and strong
combining ability, will be widely used to instead of steel fibre to reinforce the cement concrete and crack-resistant.
1. Ration design of the fibre concrete:
Generally the recommended amount to add to the concrete is more than 2.7kg per sqm (volume ratio is 0.3%),
reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the
same volume ratio to the concrete.
2. Length: 54mm for common crack-resistant requirement.
3. Matching Ratio:
Usually, it is no need to Change the matching ratio of the concrete. Considering the requirement of fissure
-resistant, the polymer fiber is recommend to combine with the PP fiber mesh form with the volume ratio of 1:1
(0.9kg fiber-mesh to per sqm of cement concrete).
4. Mixer Adoption:
Double-axle horizontal compelling mixer is priority.
5. Mixing process:
Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will
fully spread and then add cement and water and stir normally. The addition of materials also can be put into as
common concrete, but the stirring time should be properly prolonged to make fiber com-pletely mixed
6. Shaping & Maintenance:
There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete
should be done same as the normal concrete.
| Raw material | 100% Polypropylene |
| Density (g/cm3) | 0.91 |
| Elastic Modulus (MPa) | 5000min. |
| Length (mm) | 50, 54 |
| Equivalent Diameter (mm) | 0.3+/-0.05 |
| Break Tensile (MPa) | 560min. |
| Break Tensile Ratio (%) | 15min. |
| Resistance to acid and alkali | Strong |
Packing: 1kgs per bag, 10kgs per carton.
Quantity: 400CTNS/20`FCL;
828CTNS/40`FCL;
930CTNS/40`HQ
Send Inquiry to This Supplier
You May Also Like
-
Polypropylene FiberNegotiableMOQ: 2700 Kilograms
-
Glass Fiber Acrylic Fiber Polypropylene FiberUS$ 0.65 - 1.3MOQ: 500 Kilograms
-
Polypropylene Staple Fiber for Filtering YarnCNY 1.9 - 2.8MOQ: 8000 Kilograms
-
19mm Polypropylene Construction Fiber for Concrete ReinforcementUS$ 1.4 - 2MOQ: 1000 Kilograms
-
100% Polypropylene Staple Fiber 3D*38MM PP Fiber RWUS$ 1.5 - 2.38MOQ: 1000 Kilograms
-
Junchi Non Woven Oil Absorb Pad Geo Textile Use Polypropylene Synthetic FiberUS$ 1,500 - 1,500MOQ: 2 Tons
-
High Quality Polypropylene Fiber PP Staple Fiber From 3D-70D/38-108mmUS$ 1.51 - 2.3MOQ: 300 Kilograms
-
High Quality Cheapest Price Gold Silk & Silver Silk PP Yarn For CarpetUS$ 2.1 - 2.9MOQ: 1 Ton
-
Air Filtration Non Woven ClothUS$ 3.56 - 4.1MOQ: 500 Kilograms
-
PP Fiber (Polypropylene Fiber)NegotiableMOQ: 1
