FREE SHIPPING RENAULT OPEL/VAUXHALL Ver.3.5 VOLVO ORV 4 IN 1 COMMANDER

1.Commander for OPEL/VAUXHALL ver.3.5

Commander for OPEL/VAUXHALL is professional software for diagnostic of Opel/Vauxhall vehicles. It is capable to perform a diagnostic of any unit, which operates under one of the following protocols: Keyword 82, Keyword 2000 and GMLAN. It provides some unique functions, which are not supported by any other diagnostic tool.

Standard diagnostic functions:

 
For all electric control units reading identification data 
For all electronic control units read error (DTCs) 
For all electronic control units clear error (DTCs) 
Device scan 
Data Display / Measured values 
Security code programming 
Vehicle identification programming 
Injector programming - Diesel engines 
Programming of the CAN configuration 
Program immobilizer function
- Adaptation of Engine Control Module to immobilizer
- Adaptation of Immobilizer to the vehicle 
Program immobilizer outputs
- Enable/Disable Anti Theft Warning system 

Special functions: 

 
Read security code 

- With a new special function ON005 you can read Security code from all Opel/Vauxhall vehicles with CAN BUS by OBDII - Astra H, Corsa D, Vectra C, Zafira B, Agila B, Insignia
- Read security code PSG16 (Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C

Read/Write EEPROM
- Magneti Marelli 1.3 16V CDTI (Z13DT) - Agila, Corsa C, Tigra B
- SIMTEC71.1(Z18XE,Z18XEL) - Astra G, Corsa C, meriva, Tigra B, Vectra B, Zafira
- Read eeprom of the instrument Panel Cluster of Astra G, Corsa C, Meriva, Tigra B 

Odometer correction
- Odometer correction - Movano B - Instrument Panel by OBDII 
- Odometer correction in EDC16 - 1.7;1.9 by OBDII
- Odometer correction in ECU - Bosch ME7.6.2, Delco MT35E
- Odometer correction PSG16 (Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C 
- Instrument Panel Cluster - Astra G; Corsa-C; Meriva; Tigra-B; Vectra-B. NOT SUPPORT TRW IPC! 

Engine Flasher 
- Read/Write flash memory from ECU - Simtec 70, Simtec 71, Delco HDRC, Marelli MJD 602, Motronic 7.6, Delco MT35E 
Key Learning
- Read mechanical key number 

Radio
- Read radio code by OBD from Delco CDR500 

Airbag
- Erase crash data by OBD - Airbag SAB6 - Siemens with MCU Motorola HC11 

No works with ASTRA G 2000 year ( airbag, tacho, info display, securite code, Delco 500 Radio )
No works with Vectra B 2001 year ( airbag , tacho , info display ,securite code, Delco 500 Radio, no comunication .
Works with ZAFIRA B 2004 2.2 DTR Securite code reade OK ! KM change pompe dizel OK ! NO works with ( airbag, tacho, info display )

2.Commander for Renault Ver.2.10

Commander for Renault is professional software mainly for programming the new key/card of Renault vehicles.

NO NEED FROM A PIN CODE

Functions :

Connecting with all electronic control modules in the vehicle. Working by K and CAN bus diagnostic connection.
For all electronic control units reading identification data 
For all electronic control units read and clear error (DTCs) 
Airbag crash data clear Dacia Logan/Duster by OBDII 
Program ID in UCH module 
Odometer correction for Renault Clio/Kango/Meganne with HC908 JAEGER 
Key learning function - You can program key or card 
Coverage K-line and CAN Bus vehicles
- Megane II X84 2003-2006
- Megane II Ph2 X84 2007+
- Scenic II X64 2003+
- Scenic II Ph2 X64 2007+
- Laguna II X56 2000-2005
- Laguna II Ph2 X74 2005-2007
- Valsatis X73 2002+
- Valsatis Ph2 X73 2006+
- Espace IV X81 2003-2006
- Espace IV Ph2 X81 2006+
- Master Ph2 X70 2002-2006
- Master Ph3 X70 2007+
- Traffic II X83 2002-2006
- Traffic II Ph2 X83 2007+
- Kango MUX Ph2 X76 2002-2007
- Kango X61 2008+
- Clio II Ph2/3 X65 2002-2006
- Clio Symbol
- Clio Thalia
- Clio Sedan
- Clio Classic 
- Clio III 2005+ *
- Modus 2004+ *
- Master III *
- Dacia Duster * 
- Logan X90 2004-2008
- Logan Ph2 X90 2008+
- Sandero B90 2008+
- Solenza 2003-2005
- Samsung SM3 2006+
- Fluence 2009+ 
- Twingo Ph2 X06 2002-2007
- Opel Vivaro 2002-2006
- Opel Vivaro Ph2 2007+
- Opel Movano Ph2 2002-2006
- Opel Movano Ph3 2007+
- Nissan Primestar Ph2 2002-2006
- Nissan Primestar Ph3 2007+

3.Commander for Volvo 1.0   

Correction mileage in the dashboard and in the CEM module by OBDII

Supported models: 
Volvo XC60 2008+
Volvo XC80 2008+