IEC61032 Test Finger Probe with 12mm Diameter
Purpose:
This probe is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access with a finger.
Conforms to:
Standard IEC61032-1997, IEC60529-2001, GB/T4208-2008 and UL etc.
Notes:
Both joints shall permit movement in the same plane and the same direction through an angle of 90o with a 0o to +10o tolerance.
Technical Parameters:
| Kunrled finger diameter | 12mm |
| Knurled Finger length | 80mm |
| Baffle plate diameter | 50mm |
| Baffle plate length | 100mm |
| Baffle thickness | 20mm |
Send Inquiry to This Supplier
You May Also Like
-
Weighing Booth/dispensing Booth/vertical Flow BoothNegotiableMOQ: 1 Set
-
Low Temperature Dehumidifier Basement Portable Air DryerUS$ 1 - 10000MOQ: 1 Piece
-
Automatic Brick Making Machine Equipment Cement Brick Making Machinery From China Construction Compressed Brick Making MachineUS$ 399 - 1142MOQ: 1 Set
-
Metallographic Sample Thin Section Equipment/Specimen Cutting MachineUS$ 22183.35 - 23093.07MOQ: 1 Set
-
Perkins Engine 404-22 Original Brand New 4-cylinder GN71039 24.3KW/1800CNegotiableMOQ: 1 Piece
-
Waste Car Radiator Crushing Separating Machine Scrap AC Radiator Recycle MachineUS$ 37865MOQ: 1 Set
-
Genyond Brand Ballpoint Pen Refill Tube Making MachineNegotiableMOQ: 1
-
Belt ChainNegotiableMOQ: 1 Set
-
15m Motorcycle Production Assembly Line Cheap MarketingNegotiableMOQ: 1
-
High Temperature Sintering Furnace/high Temperature Resistance Furnace/muffle FurnaceUS$ 810 - 3000MOQ: 1 Piece


