IEC 60068-2-75 Universal Spring Operated Impact Hammer

Aluminum foil box

IEC60068 Universal Impact test Hammer used to test IK01 to IK06

• 6 Selectable Impact Energies 
• for impact tests to demonstrate the level of robustness 
• for household and electrical 
• 7 Selectable Impact Energie
• for impact tests to demonstrate the level of robustnes
• for household and electrical appliances

1.Introduction: 

(1) IEC60068-2-75 Spring Impact Hammer is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.

 (2)After applying the impact with the hammer, the products is examined with accessibility probes to determine

access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/UL/CSA and other standards. 

2.Application:

Adjust the impact severity by rotating the knurled cap until the desired energy-value is displayed. Pull the knob slowly out of the device until it locks in place. If moved too fast, the clamp may skip its arrester and will lock at its way back when the pulling force declines.  Hold the  device horizontally  at it’s housing tube  and press the (black)  release  cone to the specimens plane of impact. The strike is automatically released when the release force threshold is reached

3.Types:

4.Technical parameters;

length:211mm;

weight:1250g;

OD:50 mm;

Hammer Weight:60g;

Hammer radius:10mm ;

Impact Components:including the hit ball handle the hammer,weight 250g, hammer head is made from white polyethylene imine first;

The release force of impact :<10N.

About us 

Shenzhen Chuangxin Instruments Co., LTD was found in 2009 located in Shenzhen, Guangdong province, China.

We are specialized on different kinds of test equipments and main products are IEC test probes, gauges, spring hammer, glow wire tester, needle flame tester, tracking index, emc test system, LED test equipment, power supply and etc.

Our products and services are used by Research & Development establishments, Test Laboratories, Defense Establishments, Government Institutions & manufacturing industries to fulfill the clients' T&M requirements.