IEC61032 Test Finger Probe B For Safety Testing Accessory

standard packing, silver box

 IEC61032 IP2X Test Finger

This Test Probe B is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access with a finger.

Conforms to: 

This is the "international" test Probe  required by most IEC, EN and CSA standards, in addition to many UL standards. The Jointed Finger Test is a high-precision probe built in exact accordance with IEC standards such as IEC 60950, IEC 61010, and IEC 61032 and is also used for CSA and UL standards.

Appliance:

1, The joint part of  The Standard Test Knurled Finger Probe can't touch the live parts or close to the dangerous parts, and 50 mm to 20 mm baffle plate cannot enter.

2, In the prevent electric shock test, wires , power devices, and lighting devices are needed.

3Both joints shall permit movement in the same plane and the same direction through an angle of 90° with a 0° to +10° tolerance

Technical Parameters:

Service we can provide

1.High quality guarantee.

2.Shipment/Freight with professional documents.

3.Packing as your request, with photo before shipment.

4.Professional after-service from our engineers.

5.Warrantly period one year.

Our advantages

Professional technology support.

Full experience of large numbers containers loading in Chinese sea port.

Fast shipment by reputed shipping line.

Best service after shipment with emails.

Cargoes photo before and after loading into container.

Our conception

1.Client is first. We are trying to bring maximum profit to our clients and we only share small.

2.Credibility is the most important.

3.Quality control is our life.

4.Great sense of responsibility.

We will be responsible for not only our products, our clients, our suppliers, also the society