Contact Platform Support
Help CenterPocket Jumper & Battery Charger Peak Current 300A Power Bank for Smartphone ,laptop ,camera
Related Products
-
6000mAh Carku Multi Function 12v Lithium Ion BatteryNegotiableMOQ: 200 Sets -
6000mAh Carku Multi Function Super Mini BoosterNegotiableMOQ: 200 Sets
-
Pocket Li-ion Jump Starter & Battery Charger 1to 4 USB Adapter Charging for SmartphoneUS$ 28.7 - 32.5MOQ: 100 Sets
-
Jump Starter Carku Auto Mini Battery 12vNegotiableMOQ: 200 Sets
-
Pocket Mini Jump Starter & Battery Charger Peak Current 300A Power Bank for Smartphone ,laptop ,cameraUS$ 28.7 - 32.5MOQ: 100 Sets
Multifunction jump start for 12V car - EPower--10 ( Patent Product )
Product parameters:
Size: |
139*75*15mm |
Weight: |
200g |
Output: |
5V/2.1A; --- Mobile phone, Tablet PC, PSP, MP3/MP4…
Jump start;--- 12V vehicle LED light --- (light, burst flashing, SOS) |
Input: |
14V/1A ,5V2A(Mricro USB) |
Starting Current: |
150A |
Peak Current: |
300A |
Parts List:
# |
Parts Name |
Quantity |
1 |
Main Product |
1 |
2 |
USB To microUSB Cable |
1 |
3 |
Car charger | 1 |
4 |
Jump cable battery clamps | 1 |
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER-2; If you unplug the cable, auto-sleep will start in five seconds
3, Four lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Three lights indicate 75% balance, twolights indicate 65% balance, one lights indicate 25% balance . The built-in battery is empty whenall LED lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V vehicle, please make sure at least three LED lights of EPOWERare bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.
Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4 Pocket PC PDA,
Send Inquiry to This Supplier
You May Also Like
-
200A-1000A Battery Booster CablesUS$ 2MOQ: 300 Pieces
-
Emergency Safety HammerUS$ 0.65 - 4.5MOQ: 1000 Pieces
-
39 Pieces Car Emergency Tool KitUS$ 10 - 50MOQ: 100 Sets
-
Stainless Steel Special Design Triangle RingNegotiableMOQ: 50 Pieces
-
12V 16800MAH Doube USB Output Car Engine Start Power BankUS$ 25 - 40MOQ: 10 Pieces
-
Car Escape HammerNegotiableMOQ: 1000 Pieces
-
Auto Window Breaker Emergency Safety Bus Escape Hammer Car Safety Hammer Kit Seat Belt Cutter ToolUS$ 1 - 100MOQ: 100 Pieces
-
29 PCS Tool Set for Car ,emergency Tool Set ,car Tool SetUS$ 5.5 - 6MOQ: 2000 Sets
-
Car Tow RopeUS$ 2.2 - 2.5MOQ: 5000 Sets
-
Multi-Function Jump Starter (LED, Capacity LED,5V,12V,19V)NegotiableMOQ: 100 Sets
