Two Component Crack Repair Adhesive With High Thixotropic Agents

 Technical Parameters 

 Excellent Product Characteristics 

1.Belong to modified epoxy resin, high initial adhesive force.

2.Curing at room temperature, fast curing speed and can be adjusted according to users’ requirements.

3.High strength, good aging resistance and chemical resistance properties.

4.Not shrink basically when curing, good thixotropic property.

5.Very strong thixotropic property and easy Scraping.

6.Wide proportion of preparing glue, easy to control operational time.

 Typical uses of  epoxy resin crack repair adhesive 

Match the use with HM-120M pouring adhesive, HM-120L pouring crack adhesive,when grouting and repairing the concrete cracks, seal fracture surface and paste grouting nozzle, in the process of pouring and pasting steel plate construction, seal the slit around, concrete surface defect repair and leveling construction.

1. Clean the surface which need coat and scrape crack repair adhesive, without oil, sand or floating dust, etc. and keep dry;

2. Prepare glue according to recommended proportion, the proportion of A and B is 2:1, the operable time is about 45 to 60 minutes. With the B dosage increases, operable time is reduced accordingly. Each preparing glue quantity should not be too large to use up in the operable time.

3. Weigh crack repair adhesive to a clean and dry container according to the recommended ratio of preparing glue, use putty knife or other special tools to stir until the color exactly the same.

4. When used to the construction of crack perfusion, putty knives were used to coat and scrape back and forth along the cracks and evenly coat a layer of HM-120ML daub with thickness of 1 ~ 2 cm, width of 2 ~ 3 cm. Notice to prevent small air bubbles, sands, etc, from entering to cause leaky seal. When pasting glue injection nozzles, should notice to avoid clogging glue injection holes.

5. When used to the pouring and pasting construction of steel plate, seal the slit around the steel plates, bolts and grouting nozzles until compact after spatula was adopted to coat and scrape crack repair adhesive repeatedly.

6. The next process of construction can be carried out after crack repair adhesive seal construction one day (25 ℃).

 Points for Attention 

1. Construction environment is dry and ventilated, paste surface is clean, dry and free of oil; curing ambient temperature is not less than 5 ℃; curing time can be adjusted according to the difference of specific uses;

2. The construction workers of this product should take necessary productive measures (such as wearing masks, gloves, goggles, safety helmet, etc), if it accidentally touched the skin or clothes, acetone can be used to wipe at once, and then a great deal of clear water is used to flush;

3. If accidentally swallowed or splashed into the eyes, please seek medical service at once.

 Storage:

Store in dry and clean storehouse of ambient temperature 5 ℃ ~ 25 ℃, should not pile up in open air or rain, not damage the package, A, B component should be kept separate to avoid mixing. From the date of production, effective storage period is 12 months.

Transportation 

This product belong to non-dangerous goods, transport as a general chemical building materials, should not damage the package, exposure, or rain, not tilt or invert in transportation.

 What you may concern?   

1. Sample is provided.

2. MOQ: 30kg.

3. Neutral package is acceptable.

4. OEM is acceptable.

Welcome to Shanghai Horse! 

 Shanghai Horse Construction Co., Ltd.  is a well-known company in reinforcement material industry, specializing in the research, development, production and sale of reinforcing materials. Our company has passed ISO 9001:2008 international quality system certification, Product Assessment Certification audited by Bureau Veritas, A&V certification by and SGS certification by . The product quality is tested by National Test Center of Polymer and Chemical Building Materials and underwritten by PICC Property and Casualty Company. 
Our company focuses on the production of carbon fiber cloth, carbon fiber sheet, carbon fiber adhesive, anchor adhesive, structural adhesive bonding steel, structural perfusion adhesive, concrete repair adhesive, crack pouring adhesive, chemical anchor bolts, stone dry hanging adhesive and other AB two-component epoxy resin adhesives. Our products have been successfully applied to well-known architectural fields at home and abroad, such as the National Arts Centre of Trinidad and Tobago, Kuwait office OCA, the Oriental Pearl Tower, the Yellow River Bridge, the new Baiyun Airport, etc. The reinforcement material transformation project has won a widespread reputation. 

If you have any problem, please feel free to contact me, my company and I will do my best to provide you the the best products and service.