high-quality pouring adhesive, crack repair adhesive

Specifications

HM-120L pouring crack adhesive

HM-120L pouring crack adhesive is a two-component modified epoxy resin adhesive with low viscosity liquid, its viscosity is low, less heat, relaxed mixture ratio, a long pot life, the slurry infusion process is simple.

Features of  pouring crack adhesive 

1.Very strong penetration, low viscosity;

2.Anti-aging, water and acid, alkali;

3.Not contain volatile solvents, not shrink when curing;

4.Have excellent toughness and impact resistance properties after curing.

Typical uses of pouring crack adhesive

The products are widely used in crack glue injection repair of concrete bridges, houses, water conservancy, roads and other projects, and reinforcing glue injection repair of concrete internal cellular, looseness and other defects, anti-corrosion construction of glass steel, structural surface coat. It is suitable for pouring bond of cracks generated by concrete members and brick members, to achieve repairing and reinforcing cracks.

Operation Process

Crack inspection → Crack treatment → Embed pouring glue nozzle → Seal crack → Sealing check → Prepare pouring crack adhesive → Pour glue → Conservation → Examination and test

Points for Attention

Air temperature influence curing effect, high air temperature promote curing rate, low air temperature slow down curing rate;

If accidentally swallowed or splashed into the eyes, please seek medical service at once.

Transportation and Storage

Store in dry and clean storehouse of ambient temperature 5 ℃ ~ 25 ℃, should not pile up in open air or rain, not damage the package, A, B component should be kept separate to avoid mixing. From the date of production, effective storage period is 12 months;

This product belong to non-dangerous goods, transport as a general chemical building materials, should not damage the package, exposure, or rain, not tilt or invert in transportation

what do you may concern?

1, Sample is provided

2, MOQ: 30KG

3. Neutral package is acceptable

4. OEM is acceptable