LED Switching Power
Specifications
LED switching power1,LPLC-18-350/700
2,TUV UL CE ROSH
3,2years warranty
4,100% full load burn-in test
MODEL |
LPLC-18-350 |
LPLC-18-700 |
|
|
CURRENT RANGE |
6~48V |
6~25V |
RATED CURRENT |
350mA |
700mA |
|
RATED POWER |
16.8W |
17.5W |
|
RIPPLE & NOISE (max.) Note.2 |
300mVp-p |
200mVp-p |
|
VOLTAGE TOLERANCE Note.3 |
5.0% |
||
LINE REGULATION |
1.0% |
||
LOAD REGULATION |
2.0% |
||
SETUP, RISE TIME |
3600ms, 150ms / 115VAC |
||
HOLD UP TIME (Typ.) |
20ms/115VAC at full load |
||
|
INPUT |
VOLTAGE RANGE |
90 ~ 132VAC 127 ~ 186VDC |
|
FREQUENCY RANGE |
47 ~ 63Hz |
||
EFFICIENCY (Typ.) |
82% |
80% |
|
AC CURRENT (Typ.) |
0.5A/115VAC |
||
INRUSH CURRENT (Typ.) |
Cold start 40A/115VAC |
||
LEAKAGE CURRENT |
0.25mA / 120VAC |
||
|
PROTECTION |
CURRENT LIMIT |
5% rated output current |
|
Protection type : Constant current limiting type | |||
SHORT CIRCUIT |
|
||
OVER VOLTAGE |
50.4~ 60V |
28.75~ 33.75V |
|
Protection type : Shut off o/p voltage, clamping by zener diode | |||
OVER TEMPERATURE |
Tj 140oC t ypically (U1) Detect on main control IC |
||
Protection type : Hiccup mode, recovers automatically after temperature goes down | |||
|
ENVIRONMENT |
WORKING TEMP. |
-30 ~ +70oC (Refer to output load derating curve) |
|
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
||
STORAGE TEMP., HUMIDITY |
-40 ~ +80oC , 10 ~ 95% RH |
||
TEMP. COEFFICIENT |
0.03%/oC (0 ~ 50oC ) |
||
VIBRATION |
10 ~ 500Hz, 2G 12min./1cycle, period for 60min. each along X, Y, Z axes |
||
|
SAFETY &EMC(Note 4) |
SAFETY STANDARDS |
IP67 approved; design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91 |
|
WITHSTAND VOLTAGE |
I/P-O/P:3KVAC |
||
ISOLATION RESISTANCE |
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH |
||
EMI CONDUCTION & RADIATION |
Compliance to EN55022 (CISPR22) Class A, FCC part15 |
||
HARMONIC CURRENT |
Compliance to EN61000-3-2 Class A,EN61000-3-3 |
||
|
EMS IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A |
||
|
OTHERS |
MTBF |
1200.6K hrs min. MIL-HDBK-217F |
|
DIMENSION |
140*30*22(L*W*H) |
||
PACKING |
0.175Kg; 70pcs/13.3Kgs/0.71CUFT |
||
|
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
|
||
Send Inquiry to This Supplier
You May Also Like
-
25W Power Supply 5V 12V for CCTV Camera InstallationNegotiableMOQ: 100 Pieces
-
ALLEN-BRADLEY Smart Motor Controller SMC-3 150-C43NBRNegotiableMOQ: 1 Piece
-
ANDW Series Pure Sine Wave InverterNegotiableMOQ: 1 Set
-
Switching Power SupplyNegotiableMOQ: 2700 Pieces
-
Scrap Recycle Computer Hardware Untested Computer Power SuppliesNegotiableMOQ: 10000 Pieces
-
CX-9001 1KVA Knob Type Variable AC Power Supply Unit of Single Phase Input and Single Phase OutputNegotiableMOQ: 1 Piece
-
Universal Travel Adapter&power Power Converter Adapter Power SupplyUS$ 100 - 5,000MOQ: 10 Sets
-
Hot Sales 5050 Smd Led Strip Power SupplyUS$ 0.78 - 1.5MOQ: 1000 Poles
-
(DC Power Supply) QJ12003E 100% Original&New!!NegotiableMOQ: 1 Set
-
TS-001 Mini Circuit Breaker 12V Power Supply Din Rail ChannelNegotiableMOQ: 100 Pieces
