Rubber Paste Resin HF-200

Specifications

Rubber paste resin HF-200
Appearance:milky paste
Ion:Anion
Application:screen printing,table printing
paste resin for disch

Rubber Paste Resin HF-200

 

This product is our company newly developed high performance emulsion which can meet or exceed the National standard. It’s the self-crossling copolymer emulsion of butyl acrylate,acrylonitrile and other functional monomers at the radiation of Cobalt 60 with some auxiliaries.It can reach the Europe and Japan environment standard.

 

1,Specification

• Appearance:milky paste
• Solid Content:40±1%
• Density(20°C):1.10+0.05
• PH:6-7.5
• Ion:Anion
• Viscosity:(25°C,4#rotor,60rpm)5-10Pa.s

2,Features

• Contain no toxic substances, meet with the EU REACH REGULATION, JAPANESE LAW 112 and other requirements.
• Super soft, solid content reached 50%.
• Excellent fastness, high elasticity, the surface viscous is better than similar products.
• Compatible with all other ingredents in pigment printing paste, and more excellent in the mechanical and chemical stability, no plug nets.

3,Application

• All kinds of screening printing, flat, circular, roller, bed plate printing technology
• Apply to cotton, hemp, chemical fiber and blended fabric coating printing.

4,Package and Transportation

• package:PE Drum with plastic bag inside,50kg/125kg
• transportation:by buyer or seller
• storage:at the temperature of -5-40°C,in a dry and ventilated warehouse for more than 6 months

 

5,Note

• the paste resin which has been added into fixing agent and other agent should be use out within 24 hours
• baking at high temperature or adding into some fixing agent can enhance the washing fastness, but may affect the hand feeling and elasticity
• in some cases,if printing on the cotton,fixing agent is no longer needed,but should make a test sample before producing

 

The above information is confirmed by our engineer,for the practical application,pleas refer to the note before using.