Express Air Compressor Spare Parts/Bush 22386882 With Spring
Specifications
Bush 22386882Taper lock 22386882 for air compressor
bush with high quality
Brief introduction for Bush 22386882
Description: Bush 22386882 / Bush 22386882 with spring
Named:Bush or shaft seal
Type:Bush
Part number:22386882
Dongguan City Jiubei Compressor Parts Co., Ltd was established in 2000, located in Dongguan city Changan town - "China National Machinery and Hardware Mold town".
We are a Hi-Tech company specialized in research, development, manufacture and distribution of Air compressor spare parts. With our rich experience, professional technology and rigorous quality control, our products has been widely used in various brand air compressors, such as Atlas Copco, Hitachi, Sullair, Kobelco, Fusheng with good feedback and continuous orders from more than 2,000 customers in domestic and oversea marketing
Business scope:
Mechanical Seal Temperature Sensor Pressure Sensor
Maintenance Kits Solenoid Valve Thermostatic Valve
Air intake Valve Pressure Maintaining Valve Wheel Gear
Air Filter Oil Separator Oil Filter
Oil Level Indicator Circuit Board & Master Controller Bush

| 1-Oil separator | 5-Temperature valve | 9-Solenoid valve | 13-Temperature gauge |
| 2-Pressure switch | 6-Oil filter | 10-Engine | 14-Fan blade |
| 3-Controller | 7-Cooler | 11-Drive system |
15-Oil tank |
| 4-Minimum pressure valve | 8-Air filter | 12-Motor | 16-Safty valve |
|
|
Packed with carton |
|
|
Packed with pallet |
|
|
Packed with wodden carton |
1:why oil spilling
First, the compressor seals or seal off the defect guide (such as wear and tear, etc.) caused by the oil spill.
Second, the compressor shaft seal leakage loose lead.
Third, the combination of surface leakage air compressor head, inlet pipe, return pipe joints loose. Fourth, the compressor installation process to install the belt too tight cause main bearing wear. Fifth, the air compressor casting or machining production process is not perfect.
2,When we experience oil in our compressed air, the separation process isn't working optimally.
There could be many different reasons for this. Here are the most common ones:
Too high oil level
This is a temporary problem. Once enough oil has 'carried over' and the oil level drops to normal levels, the carry over stops.
Too high temperatures
If the compressor is running at high temperatures (100 - 120 degrees Celsius), it can result in an higher oil carry over rate.
Old separator
With normal running conditions, separators need to be replaced very 6000 - 8000 running hours. That's once per year or once per two years for most compressors.
When the separator becomes old, it becomes 'saturated'. The filter fabric is filled with oil. It's time to replace your separator, otherwise you risk the chance of an separator failure or collapse!
Send Inquiry to This Supplier
You May Also Like
-
Graphite Filled/plugged Brass and Bronze BushingNegotiableMOQ: 1 Piece
-
Plain BearingNegotiableMOQ: 2300 Pieces
-
Fiat Tractor Steering BushNegotiableMOQ: 1
-
Bearing BushUS$ 1 - 1MOQ: 100 Kilograms
-
Taper Lock Bushing 1610-24 for Taper Hole PulleyUS$ 1.98 - 1.98MOQ: 100 Pieces
-
Specilized Forged Shaft SleeveUS$ 1 - 100MOQ: 10 Sets
-
Made Heavy Truck Torque Rod Bushing Bushfreightliner Torque Rod Bushing Radius Rod BushUS$ 0.1 - 10MOQ: 100 Pieces
-
Taper BushNegotiableMOQ: 50 Pieces
-
ODM China Supplier Supply CNC Maching Auto Rubber BushingUS$ 0.01 - 5MOQ: 1000 Pieces
-
Bimetal Stainless Bush With High QualityUS$ 0.1 - 10MOQ: 500 Pieces







