Metal Stamping Parts Components Welded With Bimetal Silver Contact for Car Automotives

Metal stamping parts Components Welded with bimetal silver contact  for car Automotives 

 Introduction 

There are mainly three kinds of Metal Stamping Part:

(1) Riveting Parts: contact is riveted on copper component                Electrical accessories

(2) Welding Parts: sheet contact is welded on copper component         Electrical accessories              

(3)Stamping Parts: precious clad metal is stamped into contact bridge component

Main Application:low voltage electrical appliances and households,  Switch Relay Thermal Controller Circuit Breaker Contactor Controller Timer, 

Treatments: removes burr, cleaning.
Accuracy of facility: +/-0.01
Production facility: welding machine, riveting machine Switches plugs and electronic access control Electronics and electrical appliances, cars, aviation industry

OUR PRODUCING PROCESS

1. Tooling (Mold) design and Manufacture.

2. Manufacture the parts according to the Stamping Machine.

3. Riveting, Welding or Screw tap according to Client's requirement.

4. After finish manufacture process we will test the parts by the Image measurement instrument, Caliper, Angel Gage etc.

5. After make sure all the dimension can reach customer's require, we will make the surface treatment process.

6. After finish surface treatment we will testing all the parts by worker so that we can make sure the parts which we sell is 100% qualified.

7. After finish testing we will pack the parts with dryer vacuum packing.

____________________________________________________________________________________________ 

OUR ADVANTAGES