Travel 4 Port High Speed USB 2.0 Pocket Hub

            Connect your phone or tablet and view your pictures on your computer.

1) Adds 4 USB 2.0 hi-speed ports with Time Indicator 
2) Fully compliant with USB 2.0 specification 
3) Backwards compatible with USB 1.1 
4) Supports data transfer rate at 1.5/12/480 mdps
5) Individual port over-current protection
6) Friendly and ergonomic design, easily potable 
7) Provides up to 500mA per port, sufficient for diverse devices
8) Power adapter included (5V/2.6A output)
9) Plug and play installation
10) Supports Windows ME, Windows XP /2000/Vista
11) Supports Mac OS 8.6 or above
12) Hi-speed downstream ports with USB A female connectors
13) 1 hi-speed upstream port with mini USB 5p jack   
System requirements: 
1) Pentium based PC or power PC based Macintosh with available USB 2. 0 port
2) Mac/Windows OS with USB 2. 0 support

FEATURES:
- Compliant to USB specification Revision 2.0
- Support 4/3/2 downstream ports by I/O pin configuration
- Upstream port supports both high-speed (HS) and full-speed (FS) traffic
- Downstream ports support HS, FS, and low-speed (LS) traffic
- 1 control pipe (endpoint 0, 64-byte data payload) and 1 interrupt pipe (endpoint 1, 1-byte data payload)
- Backward compatible to USB specification Revision 1.1
- On-chip 8-bit micro-processor
- RISC-like architecture
- USB optimized instruction set
- Performance: 6 MIPS @ 12MHz
- With 64-byte RAM and 2K mask ROM
- Support customized PID, VID by reading external EEPROM
- Support downstream port configuration by reading external EEPROM
- Single Transaction Translator (STT)
- Single TT shares the same TT control logics for all downstream port devices. This is the most cost
effective solution for TT. Multiple TT provides individual TT control logics for each downstream port.
This is a performance better choice for USB 2.0 hub. Please refer to GL852 datasheet for more
detailed information.
l Integrate USB 2.0 transceiver
l Each downstream port supports two-color status indicator, with automatic and manual modes compliant to USB specification Revision 2.0
l Built-in upstream 1.5K pull-up and downstream 15K pull-down
l Embed serial resister for USB signals
l Support both individual and gang modes of power management and over-current detection for downstream ports
l Conform to bus power requirements
l Automatic switching between self-powered and bus-powered modes
l Support compound-device (non-removable in downstream ports) by I/O p

Other:

1.This product exported Mexico, the United States, Poland,Canada,England,and other countries.

2.We guarantee each product will be checked.

3.If there are bad products, we will promptly pay compensation to customers without any charge.

4.We also sell a lot of similar electronic products, varieties, good quality,cheap price.