OMRON Proximity Sensor E2E-X5E1 Waterproof Proximity Sensor

Specifications

OMRON proximity sensor E2E-X5E1 waterproof proximity sensor

Sensing distance5 mm ±10%

Set distance0 to 4 mm

Differential travel 10% max. of sensing distance

Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 13 and 14.)

Standard sensing object: Iron, 18 × 18 × 1 mm

Response frequency: 0.6 kHz

Power supply voltage (operating voltage range) *2 :12 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max.

Current consumption 13 mA max.

Control output Load current *2 :200 mA max.

Residual voltage :2 V max. (Load current: 200 mA, Cable length: 2 m)

Indicators :Operation indicator (red)

Protection circuits Load short-circuit protection, Surge suppressor, Reverse polarity protection

Ambient temperature range *2 :Operating/Storage: 40 to 85°C (with no icing or condensation)

Ambient humidity rangeOperating/Storage: 35% to 95%

Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of 40 to 85°C

±10% max. of sensing distance at 23°C in the temperature range of 25 to 70°C

Voltage influence±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance: 50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength :1,000 VAC, 50/60 Hz for 1 minute between current carry parts and case

Vibration resistanceDestruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistanceDestruction: 1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection Pre-wired Models : IEC 60529 IP67, in-house standards: oil-resistant

Connector Models : IEC 60529 IP67

Connection method Pre-wired Models (Standard cable length: 2 m) and Connector Models

Weight Prewired ModelsApprox. 150 g

Connector ModelsApprox. 40 g

Sensing surface PBT

Clamping nuts Nickel-plated brass

Toothed washer Zinc-plated iron

Accessories Instruction manual