Contact Platform Support
Help CenterOMRON SENSOR E3X-NA11F 2M Fiber Sensor Japan Sensor
Related Products
-
Omron Sensor E3X-NA11 Fiber SensorNegotiableMOQ: 1 Piece -
OMRON SENSOR E3JM-DS70M4 Diffuse-reflective ModelNegotiableMOQ: 1 Piece
-
Omron Photoelectric Sensors E3JM-10M4T Through-beam Infrared Photoelectric Sensor E3JM-10M4NegotiableMOQ: 1 Piece
-
Omron Sensor E3JK-DS30M1 Diffuse-Reflective Photoelectric Sensors E3JK-DS3OM1NegotiableMOQ: 1 Piece
-
Omron Sensor E3JK-5M1 Omron Relay Output Photoelectric SensorNegotiableMOQ: 1 Piece
Specifications
OMRON SENSOR E3X-NA11F 2MBAR DISPLAY AND ADJUSTER SETTING
E3X-NA11F Bar display and adjuster setting High-speed detectionmodels
Light source (wavelength): red LED (680 nm).
Power supply voltage: 12 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption: 35 mA max.
Control output: Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.) (*1) Light-ON/Dark-ON mode selector.
Response time: operate: 20 μs max. reset: 30 μs max.
Sensitivity adjustment: 8-turn sensitivity adjuster (with indicator).
Protection circuits: Power supply reverse polarity protection, output short-circuit protection, output reverse polarity protection (*3).
Timer function: OFF-delay timer: 40 ms (fixed).
Mutual interference prevention: None.
Ambient illumination: Receiver side Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max.
Ambient temperature range: Operating: Groups of 1 to 3 Amplifiers: 25°C to 55°C Groups of 4 to 11 Amplifiers: 25°C to 50°C Groups of 12 to 16 Amplifiers: 25°C to 45°C Storage: 30°C to 70°C (with no icing or condensation).
Ambient humidity range: Operating and storage: 35% to 85% (with no condensation).
Insulation resistance :20 MΩ. min. (at 500 VDC).
Dielectric strength :1,000 VAC at 50/60 Hz for 1 minute (*4).
Vibration resistance :Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions.
Shock resistance :Destruction: 500 m/s2, for 3 times each in X, Y and Z directions.
Degree of protection :IEC 60529 IP50 (with Protective Cover attached).
Connection method :Pre-wired (standard cable length: 2 m), or connector.
Weight (packed state) :Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g (*5).
Material :Case: Polybutylene terephthalate (PBT) ;Cover: Polycarbonate.
Accessories :Instruction manual.
Send Inquiry to This Supplier
You May Also Like
-
SICK ICR845-2E1020 SICK Industrial Barcode Scanner for Logistics & AutomationNegotiableMOQ: 1 Piece
-
1001995247 1001063375 1002807652 1001999981 612630060035 331001000463 1001999976 1001954223 1001995248 1001251569 1002077919 1001996818 1001999976NegotiableMOQ: 1 Blade
-
Sick WL4S-3F2132V Order Number: 1046428 Product Family: W4S-3 Inox Product Family: Photoelectric SensorsUS$ 100 - 200MOQ: 1 Piece
-
Pressure SensorNegotiableMOQ: 2000 Pieces
-
20428461 20732304 20428462 Heavy Duty Truck Sensor Parts Fuel Tank Level Sensor For VOLVONegotiableMOQ: 1
-
King Pigeon Temperature Humidity Transducer THI100 Temperature Humidity Detector Wireless SensorUS$ 2 - 31MOQ: 5 Pieces
-
Ultrasonic Position Liquid Level Position SensorUS$ 200 - 700MOQ: 1 Piece
-
Crank Oil Seal for Toyota Auto Parts Oem 90311-95012US$ 1 - 10MOQ: 1 Piece
-
SHT10 Humidity & Temperature SensorUS$ 1 - 2MOQ: 5 Pieces
-
Wholesales & Retails HCA131A High Performance Dual Axes Tilt Sensor Switch Led Light With Tilt Switch From Shenzhen FactoryNegotiableMOQ: 1 Piece
