Automatic Hot Sale High Quality Waste Tire Shredding Machine

Specifications

Automatic Single Shaft Shredder
Input material: wood, plastic, metal, rubber etc
Best configuration
Standard: ISO&CE

Specifications

Split Cutting Chamber Tire Shredding Machine
Input: Truck, car, bus OTR tire
Output: shred tires.

Low noise, High quality 
Energy-saving, environment friendly 
CE&ISO 

Split Cutting Chamber Tire Shredding Machine is the high quality machine shredding the various entire tires into pieces with the unique blade design

 

INTRODUCTION:

Dura-Shred's two shaft shredders are designed with an aggressive low RPM, high torque shredding technology. Each shaft is driven by its own Siemens motor, giving it plenty of power to drive through tires and thick steel beads. The shredder blade thickness ranges from 25mm to 152mm (1"-6") depending on the type of tires, throughput and desired end product. All of our blades are made from exotic steel and heat treated to an average 56-60 on the rock well scale. The shredder machine can process pre-cut OTR tires, truck tires and car tires at a rate of up to 20 tons per hour.

 

PACKAGE

The equipment is packaged and secured to arrive at its destination without any damage or defect. It is necessary that the condition of the machine is checked and any abnormalities found must be reported to Dura-Shred

 

MODELS

Various model of tire shredder for various market needs

EQUIPMENT SPECIFICATIONS

	TSD 2471 (182)	TSD 1663 (137)	TSD 1651
Motor Specifications	Electric	Electric	Electric
Number of Motors	2	2	2
HP/KW	55KW x 2	45KW x 2	37KW x 2
Voltage	as clients request	as clients request	as clients request
Cutting Chamber	Split Chamber	Split Chamber	Split Chamber
Blade Diameter	754mm	542mm	542mm
Large Blade Thickness	75mm	75mm	75mm
Small Blade Thickness	40mm	40mm	40mm
Cutting Chamber Dimensions	1804 x 1410	1604 x 858	1304 x 858
Equipment Dimensions(LxWxH)	5876 x 2310 x 3493	5464 x 2624 x 3040	4280 x 2206 x 2492
Equipment Weight	22400KG	13700KG	12500KG
Hopper Opening (LxWxH)	3711 x 2438 x 1046	2835 x 1628 x 770	2335 x 1628 x 770
Capacity	15-20 T/h	10-15 T/h	5-10 T/h
Product Size Range	75mm Strips-40mm chips

 

	TSD 1347 (86)	TSD 1340	TSD 1332	TSD 832
Motor Specification	Electric	Electric	Electric	Electric
Number of Motors	2	2	2	2
HP/KW	22KW x 2	22KW x 2	15KW x 2	7.5KW x 2
Voltage	as clients request	as clients request	as clients request	as clients request
Cutting Chamber	intact Chamber	intact Chamber	intact Chamber	intact Chamber
Cutting Chamber dimension	1204 x 686	1004 x 686	804 x 686	804 x 460
Blade Diameter	450mm	450mm	450mm	284mm
Large Blade Thickness	40mm	40mm	40mm	40mm
Equipment Dimension (L x W x H)	4092 x 1416 x2163	3892 x 1416 x2163	3327 x 1030 x 2075	2796 x 1256 x 2311
Equipment Weight	6300KG	5800KG	4700KG	2000KG
Hopper Opening (L x W x H)	1521 x 1416 x695	1321 x 1416 x695	1120 x 1257 x 800	1120 x 1256 x 800
Capacity	3-5 T/h	2-3 T/h	1-2 T/h	800-1000 KG/h
Product Size Range	40mm chips

 

BEST SERVICE

At Dura-shred we pride ourselves on delivering superior customer service and support. We believe that our real work starts after the sale. We take great care to insure that equipment is delivered on time and to our customer's specifications. We supply detailed installation drawings as well as service and maintenance manuals for every machine we manufacture. 

 

INTRODUCTION ON OUR RECYCLING PLANT

The Dura-Shreds Tire Recycling Plants are designed to process up to 2 tons of output per hour. Dura-Shreds system is proven turn whole scrap tires into high quality, uncontaminated crumb rubber. it is uniquely designed to allow the customer to adjust the equipment screens for precise sizing control and flexibility for output sizes. our crumb rubber systems also utilize a variety of conveying and separation technologies to minimize product losses, maximize efficiency, and maintain a clean operation environment.

 

THE FEATURES OF OUR SYSTEM

system capacity :  2 metric tons of output per hour of semi OTR, truck and car tires.

 

POTENTIAL BY PRODUCTS AND SIZES

1.tire derived fuel chips (TDF)- 1"-6" nominal chip

2.rubber mulch - 10-30 mm mulch (after the grater, size controlled by screen inside grater)

3.rubber crumb- 1mm-6mm (after the granulators, size controlled by screen inside granulator)

4.rubber powder 30-120 mesh (after miller, size controlled by centrifugal screen)

5.steel

6.fiber

 

CRUMB RUBBER PURITY

1. 99% free of textile

2. 99.9% free of steel

3. 99.9% free of stones and other contaminants

 

STEEL PURITY

95%-97% contaminant free, more machinery will be needed for cleaner steel

 

MAINTENANCE

Shredder Allow for 20 minutes for every 8 hours of run tern-tighten bolts, lubricate and inspect.

Grater Allow for 60 minutes for 8 hours of run time-tighten bolts, lubricate and inspect

Granulators 20 minutes for every 8 hours of run time-tighten bolts, lubricate and inspect, change blades if necessary

Miller Allow for 10 minutes for every 8 hours of run time-tighten bolts, lubricate and inspect.

 

ENVORNMENTAL COMPLIANCE

Air system included cyclone and filtration system are also included. There are no harmful pollutants generated or released in the shredding process. Any fiber or rubber that accumulates outside of the equipment can be disposed.

 

HUMAN RESOUCE REQUIRMENT

The plant can be run by 8-9 people per shift. Here is a typical employee breakdown for a full functioning recycling plant

1 plant manager

2 maintenance technicians

2 tire handlers

1-2 steel handlers

1 fiber handler

1 quality control packaging technician

Any questions, be free to contact me!( Skype:durashred-sales803)