Contact Platform Support
Help CenterPF-1A Wire Flame Spray Gun Oxygen and Acetylene Gun Electric Wire Spray Machine Thermal Spray Machine
Related Products
-
PF-4A Wire Flame Spray Gun Oxygen and Acetylene Gun Electric Wire Spray Machine Thermal Spray MachineUS$ 500 - 600MOQ: 1 Set -
PF-5A Thermal Spray Machine Wire Flame Spray Gun Oxygen and Acetylene Gun Electric Wire Spray MachineUS$ 500 - 600MOQ: 1 Set
-
PF-2AN High Velocity Oxygen and Acetylene Gun Electric Inside Bore Spray Torch Wire Flame Spray Gun Thermal Spray MachineUS$ 500 - 800MOQ: 1 Set
-
PF-2Bthermal Spray Oxygen and Acetylene Gun Electric Inside Spray Torch for Wire Flame Spray GunUS$ 600 - 800MOQ: 1 Set
-
Wire Flame Spray Gun PF-2 Thermal Spray Machine Oxygen and Acetylene Gun Electric Wire Spray MachineUS$ 500 - 600MOQ: 1 Set
1. Mechanical transmission part
Metal wires utilize the motor as power to drive planet gear and worm & worm wheel to revolve a pairs of metal wire feeding wheel in reverse direction relying on spring pressure clamp clip wires to feed wires to head of spray gun. In order to stabilize metal wire delivery speed and adjust speed, a appreciate speed adjustor is equipped to achieve metal wire delivery stepless speed adjustment to suitable for spray painting of diverse materials.
flame spray machine
2. Mixing head (gas mixing part)
Mixing head, a principal mechanism to control mixing of oxygen & inflammable gas and air switch comprising body, nozzle, air cap, mixing tube, valve pole cover and valve pole, etc. The bottom of body is a valve pole cover consisting of valve pole, oxygen, inflammable gas and air seal. There are one piece of rubber seal membrane with diverse grooves on the surface of valve pole to control and dispatch three gas into mixing head to guarantee normal ignition and Open & close to reach common spray coating purpose.
Turn valve pole spanner in 90 degree, inflammable gas has little sinkage. Few inflammable gases entered the nozzle, and the rest gas seals are all closed. Ignition can be done. When ignited, turn valve pole spanner to 180 degree from 90 degree in the same direction, all heads go down, the blaze will be formed before air cap to blow out air between the nozzle and air cap, spray melted metal wire fog (sparks) on working part to shape a coating.
No. |
Item |
Performances and Technical Data |
||||||
1 |
Model |
QX-2A |
||||||
2 |
Operation type |
Manual or fastening |
||||||
3 |
Power source |
DC motor |
||||||
4 |
Weight |
≤2.3kg |
||||||
5 |
Overall size |
230×85×190 |
||||||
6 |
Speed adjustment type |
stepless speed adjustment |
||||||
7 |
Heat source |
Oxygen-ethyne flame |
||||||
|
8 |
Gas meter pressure |
Oxygen |
0.4--0.5MPa |
|||||
Ethyne |
0.07-0.1 MPa |
|||||||
Compressed air |
0.5-0.6 MPa |
|||||||
|
9 |
Gas consumption |
Oxygen |
1.8m3/h |
|||||
Ethyne |
~1.2 m3/h |
|||||||
Compressed air |
1~1.4 m3/h |
|||||||
10 |
Wire material dia. (mm) |
φ2 φ2.3 φ3 |
||||||
|
11 |
Spray coating efficiency |
Steel 80# |
φ2.3 |
|
Low-carbon steel |
φ3 |
2kg/h |
|
Aluminum |
φ3.0 |
2.7kg/h |
Stainless steel |
φ2.3 |
1.8kg/h |
|||
Zinc |
φ3.0 |
8.2kg/h |
Copper |
φ3.0 |
4.3kg/h |
|||
Al2O3 |
φ2.2 |
0.4kg/h |
Molybdenum |
φ2.3 |
0.9kg/h |
|||
12 |
Gravitation |
6.5 kg |
||||||
Send Inquiry to This Supplier
You May Also Like
-
Odorless PA12 Powder Coating for Sport Bras - Passed EN71-3 Safety StandardUS$ 10 - 30MOQ: 100 Kilograms
-
Electrostatic Paint Spray GunUS$ 200 - 500MOQ: 5 Pieces
-
Coating LineUS$ 1,000 - 100,000MOQ: 1 Set
-
Stainless Steel Sheet PVD Coating (Vacuum Plating) EquipmentUS$ 8 - 10MOQ: 1 Piece
-
High Quality Electrostatic Powder Coating MachineUS$ 2,333 - 4,555MOQ: 1 Set
-
Temperature Indicator for Sputtering SystemUS$ 240 - 480MOQ: 10 Pieces
-
Feiyide Eelctroplating Machine Chemical Liquid Filter Pump Plating PlantUS$ 500 - 3,000MOQ: 1 Set
-
DLB Fluid Bed Fertilizer Fluid Bed Coater(machine to Make Powder Coating)US$ 30,000 - 31,000MOQ: 1 Set
-
PVD HARD COATINGNegotiableMOQ: 1
-
Power Metal Polish MachineUS$ 3,000 - 5,000MOQ: 1 Set
