Contact Platform Support
Help CenterPET Wet-Applied Waterproof Membrane
Related Products
-
Pre-laid Polyester Waterproof MembraneUS$ 3 - 5MOQ: 10 Square Meters -
Wet-applied/Pre-laid Polyester Waterproof MembraneUS$ 3 - 5MOQ: 10 Square Meters
-
Wet-Applied Waterproof MembraneUS$ 3 - 5MOQ: 10 Square Meters
-
PET Bitumen Waterproofing MembraneUS$ 3 - 5MOQ: 10 Square Meters
-
PET Self Adhesive Modified Bituminous Waterproof MembraneUS$ 2 - 3MOQ: 10 Square Meters
JH-W200 PET Wet-Applied Waterproofing Membrane is a kind of cost-effective and environmental-friendly construction materials which contains adhesive materials and polyester (PET) film. The membrane has many advantages such as good adhesive strength, so it can be paved by both self-adhesive and wet-laid methods on the wet base surfacce.
1, The membrane can easily maintain its shape even in complicated base surfaces for its perfect adhesive strength.
2, Self-adhesive and wet-applied methods make the construction safe and environmental friendly.
3, Leakage rarely heppens even the membrane is broken for its good creep deformation abiliity.
4, The membrane can be used for temporary repairing in the steel roofing structure.
Wide usage in civil and industrial waterproof projects like basements and roofs, etc.
Performance Standard GB/T23457-2009 TYPE-P
| Item | P | ||
| ι | ιι | ||
| Elongation property | Tensile strength/N/50mm ≥ | 150 | 200 |
| Elongation rate at the maximum tension /%≥ | 30 | 150 | |
| Tear strength/N≥ | 12 | 25 | |
| Heat resistance | 70 ℃ (no slipping, no dripping and no fall-off) | ||
| Low temperature flexibility/℃ | No cracks | ||
| Water impermeability | 0.3MPa 120min impermeable | ||
| Peel strength among membranes N/mm≥ | No treatment | 1.0 | |
| Thermal ageing | 1.0 | ||
| Oil permealibity/sheet ≤ | 2.0 | ||
| Holding power/min ≥ | 15 | ||
| Peel strength between the membranes and cement mortar (N/mm)≥ | No treatment | 2.0 | |
| Thermal ageing | 2.0 | ||
| Peel strength between the membrans and cement mortar after immersion (N/mm) | 2.0 |
||
Base surface treatment-Preparing cement mortar-Corners and joints treatment-Laying cement mortat-Pre-laying and lapping the membranes-Pressing out the air-Fixing the edges of the membranes-Sealing
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Membrane Structure Entrance Gatehouses for Residential Communities, Membrane Structure School Stands, Production, Construction and Installation of Pvdf Membrane Structure Stadium RoofsUS$ 30.62MOQ: 900 Square Meters
