Contact Platform Support
Help CenterSBS Modified Bitumen Waterproof Membrane
Related Products
-
APP Modified Bitumen Waterproof MembraneUS$ 2 - 5.5MOQ: 10 Square Meters -
SBS/APP Modified Bituminous Waterproof MembraneUS$ 2 - 5.5MOQ: 10 Square Meters
-
SBS Modified Bituminous Waterproof FeltUS$ 2 - 5.5MOQ: 10 Square Meters
-
APP Modified Bituminous Waterproof FeltUS$ 2 - 5.5MOQ: 10 Square Meters
-
SBS Torched Modified Bitumen Waterproof MembraneUS$ 2 - 5.5MOQ: 10 Square Meters
JH-N100 SBS Modified Bitumen Waterproofing Membrane is a kind of macro-molecule material produced by advanced equipment and technology, using high-quality bitumen as its main component, Styrene-Butadiene-Styrene(SBS) as the modifier, superior materials as its reinforcement and many excellent materials as its isolating materials.
Low temperature resistance, high elongation ability, strong tensile strength, good abrasive resistance and easy to pave.
1. Industrial and civil roofing construction such as insulation roofs, planted roofs, roof parking lots and inverted roofs, etc.
2. Industrial and civil underground construction, indoor swimming pools, fire reservoirs, etc.
3. Tunnels, subways, concrete bridges, sewage plants and refuse landfills, etc.
4. Water conservancy facilities such as pools and water channels, etc.
Performance Standard GB 18242-2008
| Item | Index | |||||
| Ι | ΙΙ | |||||
| PY | G | PY | G | PYG | ||
| Content of Soluble Substance (G/m2) | 3mm | 2100 | ||||
| 4mm | 2900 | |||||
| 5mm | 3500 | |||||
| Heat Resistant | ºC | 90 | 105 | |||
| ≤mm | 2 | |||||
| Low Temperature Flexibility/ºC | -20 | -25 | ||||
| No Crack | ||||||
| Water Impermeability (30min) | 0.3MPa | 0.2MPa | 0.3MPa | |||
| Tension |
Maximum Tension (N/50mm) ≥ |
500 | 350 | 800 | 500 | 900 |
| Secondly Maximum Tension (N/50mm) ≥ | 800 | |||||
| Elongation Rate | Maximum Elongation Rate / % ≥ | 30 | 40 | |||
| Maximum Elongation Rate / % ≥ | 15 | |||||
| Increased Quality After Immersion % ≤ | RE/S | 1.0 | ||||
| M | 2.0 | |||||
1, Torch-applied method and cold adhesion method are both feasible , or we can use these two methods together during the construction, which means cold adhesion method used at the main part and torch-applied method used at the seam.
2, Torch-applied method: use spray guns or blowtorches to heat the membrane and the base surface. While the bitumen on membranes is melting, roll the membrane forward, then use roller to make the membranes and the base surface stick together.
3, Cold adhesion method: brush adhesives on the base surface and membranes, after a while, pave the membranes, meanwhile press out the air with the roller until the membranes and the base surface stick together tightly and flat-wise.
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Etfe Air Cushion Membrane Structure Roof, 1050 Pvdf Membrane Tube Truss Toll Stations, Gas Stations, and Charging Station Canopies, Ptfe for Sports Exhibition Venues, High-speed Railway Station Platforms, and Waiting HallsUS$ 61.38MOQ: 1000 Square Meters
