Contact Platform Support
Help CenterVarious Types Graphite Molds for Glass
Related Products
-
Various Types Graphite Parts for Glass ManufacturingUS$ 50 - 300MOQ: 1 Piece -
Graphit Furnac Tube for HeatingUS$ 50 - 300MOQ: 1 Piece
-
Graphite Carbon Heater for FurnaceUS$ 50 - 300MOQ: 1 Piece
-
Various Types of Graphite Bracket for FurnaceUS$ 50 - 300MOQ: 1 Piece
-
Graphite Furnace Graphite Heating ElementsUS$ 50 - 300MOQ: 1 Piece
various types graphite molds for glass
| INTRODUCTION: |
various types graphite molds for glass
are used in the high temperature furnace with temperature reached 2200 degree at vacuum environment and 3000 degree in the deoxidized and inserted gas environment.
Advantages of graphite molds for glass
1, uniformity of heating structure.
2, good electrical conductivity and high electrical load.
3, corrosion resistance.
4, inoxidizability.
5, high chemical purity.
6, high mechanical strength.
The advantage is energy efficient, high value and low maintenance.
We can produce anti-oxidation and long life-span graphite crucible, graphite mold and all parts of graphite heater.
| TECHNICAL SHEET:(COMMON MODELS) |
Technical Specification |
JSMC-3 |
JSMC-4 |
JSMC-5 |
Bulk Density (g/cm3) |
≥1.72 |
≥1.78 |
≥1.85 |
Ash Content (PPM) |
≤1000 |
≤1000 |
≤1000 |
Shore Hardness |
≥40 |
≥40 |
≥45 |
Specific Resistance (μ.Ω.m) |
≤12 |
≤12 |
≤10 |
Flexural Strength (Mpa) |
≥30 |
≥35 |
≥40 |
Compressive Strength (Mpa) |
≥50 |
≥60 |
≥70 |
Max. Grain Size (μm) |
≤43 |
≤43 |
≤43 |
Coefficient of Thermal Expansion Mm/°C |
≤4.5*10-6 |
≤4.5*10-6 |
≤4.4*10-6 |
We can supply below related graphite parts:
various kinds of heating elements, heating chamber, hearth, heating tube, bracket, joint board, graphite adjusting plate, joint part, graphite tie-in of conducting rod, graphite heater, graphite insulated chamber, graphite tray, graphite box for sintering, graphite plate, heater tube, bridge frame, connection patrs, electrode joint, insulation barrel and heat shield for heating system etc.
| PRODUCING TECHNOLOGY: |
1. Quality assurance,we use high grade raw material and do strict inspect during the whole procession. All products adopt GB,ISO,ASTM,BS,JIS and DIN standard as per requirement. ISO, BV, TUV, SGS certified.
2. Provide professional designing solution, field technical assitance and any other consulting.
3. Price advantage, provided by manufacturer directly,save much intermediate fees.
4. Professional team, specialized in refractory production since 2000,with advanced technology and vast experience.
5. High production capacity, fast delivery of goods.
6. 24*7 online service.
7. OEM service available.
| CONTACT: |
David Li (International sale)
Email: david_li(at); Mobile(Whatsapp): 0086 158 3750 6496; Wechat: lifanya8888;
Skype: live:lushanyaxing_1
Send Inquiry to This Supplier
You May Also Like
-
Graphite FeltNegotiableMOQ: 1
-
Graphite Bush Bearing, Mechanical Bearing, China Bearing FactoryUS$ 0.01 - 3MOQ: 500 Pieces
-
ISO Approval GPC/petroleum Coke/carbon AdditiveUS$ 500 - 700MOQ: 20 Tons
-
Carbon PackingUS$ 10 - 100MOQ: 1 Piece
-
Carbon Electrode，graphite Electrode，The Furnace Uses Carbon Electrodes，with Nipple，φ250mm，environmentally Friendly and Efficient，NegotiableMOQ: 10 Tons
-
Carbon Graphite Electrode With Nipples RP HP UHP 750mm 700mm 650mm 600mm 550mm 500mm 450mm 400mmCustomized Dia 800-1400mmUS$ 1200MOQ: 100 Pieces
-
UHP φ700mm Graphite ElectrodeUS$ 3800MOQ: 2900 Tons
-
Graphite Electrode, Graphite Crucible, Graphite Block, Graphite Plate, Graphite Rod, Graphite Manufacturer Quality Assurance Price DiscountUS$ 1150 - 2150MOQ: 10 Tons
-
Graphite ElectrodeNegotiableMOQ: 10 Short Tons
-
Graphite Products Manufacturers in ChinNegotiableMOQ: 10 Tons
