Contact Platform Support
Help CenterExcellent Epoxy Paint for Steel Surfaces of Food Safety & Concrete Industrial Floor, Heat Resistant, JIS Standard JONA EPO
Related Products
-
Bitumen Paint for Concrete & Metal Industrial Tank and Pipe, Resit Water & Sea Water JONA BITUMUS$ 0.9 - 1.6MOQ: 1 Ton -
Epoxy Paint for Metal Surfaces, Industrial Machines JIS StandardUS$ 3.5 - 4.8MOQ: 1 Ton
-
Epoxy Primer With Zinc Phosphate Heat Resistant Excellent for Steel Surfaces JONES ZIN-PUS$ 3 - 3.8MOQ: 1 Ton
-
Epoxy Primer With Zinc Rich Heat Resistant Excellent for Steel Surfaces JONES ZIN-RUS$ 4 - 6MOQ: 1 Ton
-
Epoxy Primer Rust Proof for Steel Surfaces and Resist Alkalization for Concrete Surfaces JONES EPOUS$ 2.5 - 3.9MOQ: 1 Ton
JONA®EPO is the two-component solvent based epoxy finish.
It is used for the steel surfaces of tanks, holds which have the demand of food safety or of an epoxy coating
system.
It is used for concrete floor surfaces of house, laboratory, workshop, places which are frequently walked on.
JONA®EPO has been certified as conforming to the Japanese Industrial Standard JIS K 5659:2008.
- Good adhesion on metal and concrete surfaces.
- Durability and fast color film.
- Standing impact, abrasion and the influences of chemical substances well.
- Resistance to fungus and alga.
- Heat-resistant up to 1000C (un-continuous).
| Color | Color chart or requirements |
| Solid content | min.50 % |
| Density | 1.30 ± 0.1 g/ml |
| Theoretical coverage | 7 – 9m2/kg/0.04 mm coat. |
| Film thickness |
WFT: 90µm DFT : 40µm |
| Drying time (230C) |
Touch dry: 4 hours Hard dry: 16 hours |
| Recoating time (230C) | Min. 16 hours |
| Mix ratio (By the weight of A/B) |
4/1 |
| Pot life (230C) |
7 hours |
Tools:
Airless spray: the fluid tip diameter is from 0.43mm to 0.65mm, min output fluid pressure is 15MPa (150kp/cm2). The angle of spray from 400to 650.
Conventional spray.
For inconsiderable surfaces: brush can be used, care must be taken to achieve the specified dry film thickness.
Clean tools after using.
- The practiced surface should be clean, dry and free oil, grease and chalking.
- Firstly, stir well the base (part A) with an agitator, then pour the hardener (part B) slowly into the stirred base (part A), and mix them (part A with part B) together thoroughly in the ratio of 4 to 1. Thinner should be only used in the case of exceptional circumstances (max. 3% by the weight of A & B mixture).
- The available A & B mixture must be used within the pot life (7 hours at 230C).
- The practiced surface temperature is more than 100C (It’s at least 50C above the dew point) and the practiced space humidity is equal or less than 85%.
- Drying time depends on temperature, humidity and ventilation of application space. High temperature and good ventilation help the drying time to be more quickly.
L.Q JOTON's laboratory conformed to ISO/IEC 17025:2005 , which is one of most prestigious chemical laboratories in Vietnam
Barrel 16 kg (part A) + 4 kg (part B)
Tinned can 3.2 kg (part A) + 0.8 kg (part B)
For small packings as 1 liter Packing and 3.8 liter Packing, we use Carton Box to cover them for stacking them on the pallets neatly.
We have 3 factories for Paint and Relate Coatings in the North and the South of Vietnam, together with many Branches and Agents stretch on all of our country topography.
Please visit our Paints and Related Coatings website at .vn for more information.
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Epoxy Resin Paint Industrial Paints for Spray Application on IronUS$ 1 - 9MOQ: 1 Kilogram
-
PVC Coating Powder for Security Wire Mesh Fence - Enhanced DurabilityUS$ 2 - 5MOQ: 1000 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Glass Car Body Coating From JapanUS$ 150,000 - 150,000MOQ: 1 Carton
