bouncy kindergarten floor covering material

• Comfort; Due to the buffer coat layer, the floor is very comfortable to play on compared to the commonly used hard court solutions.
• Safety; with its renown, durable silicon PU top finish with its well-balanced friction/sliding properties, the Comfort Court offers safety for the players at all time.
• Seamless design; 70% of all floor failures start with a seam; so, no seams, no porous, no problems.
• Closed surfaces; No dirt or bacteria can penetrate the floor; very easy to clean, very hygienic.
• Multisport use; The surface makes it suitable to play all kinds of ball games, including tennis, basketball, handball, football or netball.
• Every design is possible; Including using more colours in one floor or inserting a sports club logo in the floor.
• Excellent UV resistance; This ensures a surface with the same appearance for years and years after installation.
• Resistant; silicon PU Comfort Court is resistant against cigarette burns and many common chemicals.
• Easy to repair; When the floor is damaged, it can be repaired seamlessly.
• Asphalt or Concrete sub-base; Both are suitable for silicon PU Comfort Court. There are no limitations when you choose to install a silicon pu Comfort Court system.

1)What are the differences of PVC ,Polyurethane, Acrylic and Silicon PU?

Answer:

Silicon PU

It is a new material for the sport surface. After finished, it’s hard on the top while the bottom is elastic. It is a one-component polyurethane and water-born material.

No need to add any hardener,add water will be cured. It is odorless, suitable for both indoor and outdoor. Can be installed on the concrete directly. Silicon PU is not only polyurethane mix with acrylic , or polyurethane with sand. It’s including buffer coat and top coat, so the sport surface will have a good cushion effect.

Acrylic

Acrylic is a material designed by ITF, the surface are colorful and texture. But the surface of the acrylic is easy to be scratched, faded and came off after a period of use. There is no elastic on Acrylic sports flooring. That’s without any protection to athletes.

Polyurethane

It is two-component polyurethane with elastic feature. Under the sunshine, this kind of sports flooring will become soft, sticky, and smelly. During the installation, you must add hardener. Because polyurethane is oily material. After finished, the surface is smooth and bright. This kind of material will be frothy on the concrete.

PVC

It is roll pack. PVC can only be used for indoor. And have the fixed width, there is small gap between the connecting point. It’s not safty. And the flooring is hard.

2)How to use our products ?

Open the barrel--mix the materials--pour on the floor--paint by roller or gal raker

3)How to install our products?

It’s easy to install, we have installation guide with pictures for reference.

We also provide site installation service.