Accessories for Wire Shelving -post and shelves

Accessories for Wire Shelving

Chrome Wire Shelving Posts

Chrome Wire Shelving Posts are an essential component of any Chrome Wire Shelving Unit. Various Chrome Wire Posts can be used to add height for extra shelves to your Chrome Wire Shelving Unit. Additionally, Chrome Wire Posts can be purchased and used to design your own Chrome Wire Shelving System. We have standard Chrome Wire Posts as well as Black Chrome Epoxy Posts and White Chrome Epoxy Posts to fit your particular unit. Each Chrome Wire Post comes with Post Caps and Post Leveling Feet. Chrome Wire Posts are sold separately or in sets of 4 for your convenience. When designing or adding on to your Wire Shelving System, be sure to get some Chrome Wire Post accessories too including Casters, Donut Bumpers, Post Clamps, Wall Brackets and Foot Plates.

Our set of 4 round posts, 1" in diameter, are manufactured to provide strength and durability. Each post comes with a post cap and leveling foot.  Use in combination with our additional Chrome Wire Shelves to create add-on units and special configurations. There are indents on each post spaced every 1" for maximum shelf adjustable. Simply clip on plastic split sleeves that come with the shelves on the same level of every post. Then lower the shelf onto the posts where they stop at the split sleeves. Apply pressure to hold shelves and place. Multiple sized posts cannot be attached to add height so it is best to measure your space to make sure you are getting maximum height. If a specific height is needed post can be cut in our distribution center.  A small nominal fee will apply.  We are happy to help you make your shelving project perfect to your needs.

Wave Hook-Black

Snap on a wave hook to your wire shelving post and see how useful you can make your space work.  These snap on to any round 1" diameter post and will create a place for you to hang your shirts, jackets or just about anything you want near your shelving unit.  Weight capacity is 4.4 pounds per hook.  Made of molded recycled ABS plastic materials.  Buy one today you will love it.

Want to store a beverage near your shelving unit but you don't want to risk placing it on a shelf? No worries with this awesome new accessory to hold beverages or any liquid of choice in a container.  These mount directly on to any 1.0" diameter round post and there is no need to remove any shelves to add this accessory.  They simply snap on and you can use them to safely store a beverage or liquid on your shelving unit. Available in black, chrome and white finishes to match your shelving unit finish.  Great for kids rooms, dorm rooms and garages where you may want to have a beverage nearby. These hold up to 2.2 pounds so you'll be confident that it will safely store a liquid of choice.  Order one today, you love it.

The JIAXINBAO Chrome wire document holder makes it a breeze to stock papers and files on any side of a shelf.  The document holders are used anytime you need files near your shelving or carts.  Computer work stations, order picking carts and just plain old stand alone shelving.  The document holder measures 10"H x 12"W x 5-1/2"D.  The sturdy wire chrome construction and snappy brite chrome finish will add a lot of long time orginzation and value to your shelving investment.  This document holder will allow you to finally have a central place to put the mail. Just add this on to a chrome wire shelf, and voila! the perfect mail bin! Try one today.  You'll love this accessory.

Hanger Rails fit on posts to run width or length of unit.  Accepts utility hooks, storage baskets and "s" hooks.  You can also use the hanger rails to brace the bottom of a shelving unit in the event 

you don't want or need a shelf at the bottom.  Comes complete with two sets of plastic splitsleeves.

Use in corners or for continuous runs of shelving. Use two hooks on each shelf where two posts are not used.

S-Hooks

Use in corners or for continous runs of shelving. Two hooks should be placed where two posts are not used.

Foot Plates

Use of floot plate on post allows unit to be bolted to the floor for added support. Sold in packages of four.

Mobile Kits

Donut Bumper
Non-marking donut bumper used to protect walls and help cusion impact.

Mobile Kit Set of four polyurethane casters. Two swivel and two rigid with brakes. Used with starter units. 1,200 lb. load capacity.Conductive Mobile Kit
Used with aluminum split sleeves and ground cable to properly ground mobile units. Set of four 5” x 1-1/4” swivel casters, two with brakes. Used with starter units. 1,200 lb. load capacity.

ESD Split Sleeves

Aluminum Split Sleeves required when grounding standard wire shelving in conductive applications

ESD Drag Chains

Drag chain used to ground standard wire shelving units. Used in conjuction with aluminum split sleeve 

Language Option

Chrome Wire Shelf is manufactured to the same exacting standards of our wire shelving units and includes 1 set of plastic split sleeves.