Contact Platform Support
Help CenterElectric Pre-stressed Concrete Pole Spinning Machine
Related Products
Pre-stressed concrete pole spinning machine is a kind of equipment which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.
This machine is operated by full automatic four speed frenquency control motor. It runs smoothly and has a variable-speed range. So the production of concrete poles and piles are good at quality.
The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.
Features:
1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).
2. Crack resistance can increase about 3~5 times.
3. Rigidity increases 1~3 times.
4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).
5. Good durability, can delay the existence and expansion of cracks.
6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.
Technical Parameter:
Technical Data:
top end inner diameter (mm) |
Tread (mm) |
Running wheel diameter (mm) |
Length (m) |
150 |
2000 |
600 |
7-12 |
170 |
2000 |
600 |
7-12 |
190 |
2000 |
650 |
7-15 |
230 |
2000 |
650 |
6-9 |
300 equal diameter |
2000 |
600 |
6-9 |
350 equal diameter |
2000 |
650 |
6-12 |
310 |
2000 |
650-780 |
6-15 |
Working Principle:
1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
3. The speed of separation is slow when the viscosity of slurry is high.
4. It is good for centrifugal sedimentation when the slurry density is different in each component.
Send Inquiry to This Supplier
You May Also Like
-
Rain Tube Equipment &bending Machine Made in China for SaleUS$ 28,000 - 52,000MOQ: 1 Set
-
DAHAN Series Vertical Concrete Cement Pipe Making Machine and MouldUS$ 500 - 10,000MOQ: 1 Set
-
China Laminated Tube Making MachineUS$ 10,000 - 20,000MOQ: 1 Piece
-
Iron Copper Aluminum Steel Pipe Straightening MachineUS$ 2,500 - 3,500MOQ: 1 Set
-
Tube Milling MachineUS$ 75,000 - 950,000MOQ: 1 Set
-
Pipe Cutting Making MachineNegotiableMOQ: 1 Set
-
New Products Concrete Culvert Pipe MoldUS$ 5,000 - 12,000MOQ: 1 Set
-
COMIFO Vertical Duct Seam Closing Machine for Air DuctNegotiableMOQ: 1 Set
-
EFPEG-75 PE Foaming Rod Extruder (CE APPROVED)US$ 15,000 - 23,000MOQ: 1 Set
-
Injection Molding Machine for PE Pipe FittingNegotiableMOQ: 1 Set
