Contact Platform Support
Help Center610*914mm Magnesium Alloy Plate Made in China
Related Products
-
AZ31B Magnesium Alloy PLATEUS$ 100 - 500MOQ: 10 Pieces -
HOT SALE Az91 Magnesium PlateUS$ 100 - 500MOQ: 10 Pieces
-
Magnesium Panel Made in ChinaUS$ 100 - 500MOQ: 10 Pieces
-
Photo Etched Plate Can be Hot Stamped at Least 150,000 TimesUS$ 30 - 1,000MOQ: 10 Kilograms
-
High Purity Magnesium Panel Made in ChinaUS$ 100 - 500MOQ: 10 Pieces
- Magnesium is light metal, it’s ion exists widely in soil and water, and harmless to human body or environment.
- The Magnesium plates was etched very fast, normally within 3 minutes in the new chemical.
- Magnesium photoengraving plate is lightest between Brass and Zinc plate. Therefor the magnesium engraving plate is better to be pasted and stamped.
- No deformation happen during hot stamping process. Fast temperature rising, the stmping rate is more than 120000 times.
- Magnesium engraving plate is easier to be etched with a highest speed between Brass and Zinc engraving plate. Normally magnesium engraving plate is to be etched in 1 mm deepth within 7 seconds.
- The surface hardness of the magnesium plates is very close to the cooper.
- The magnesium plate after rolling with 3000 tons cold rolling mill and also 2500tons hot rolling mill, then do the tempering treatment, our plates with uniform thickness, the tolerance of thickness is near zero, the plates is no anisotropy, eliminate the internal stress of the plates
The photoengraving plates is made from process of multi-rolled, tempering, sanding, The sensitive glue in advance and Anti-corrosion paint back, coating,ect.
Our standard size: 500*1000mm, 610*914mm. other special size can be made based on
Your requirement, normally thickness are 1.5mm 2.0mm 3.0mm 4.0mm 6.35mm 7mm.
The technology of etching magnesium engraving plate is similar with that of Zinc engraving plate.
We here provide a term of parameter as below, please adjust in your local facility according your machine, your conditional temperature and water to get a better parameter.
40 L machine: 7 L Nitric acid (68Be), 1.5 L magnesium etch additive, 31.5 L water, temperature 28-30°C, 475r/m.
80 L machine: 14 L Nitric acid (68Be), 3 L magnesium etch additive, 63 L water, temperature 28-30°C, 475r/m.
Note: please adjust the parameter according the breadth and depth of magnesium engraving plate to be etched.
Send Inquiry to This Supplier
You May Also Like
-
Carbon Fiber Used for the Sewage and Water TreatmentNegotiableMOQ: 10 Kilograms
-
High-Performance Hollow Grouting Anchor Bolt R32S for Geotechnical EngineeringNegotiableMOQ: 1 Meter
-
Wodon A36 Steel Plate Super Wear-Resistant Chromium Carbide Overlay Coil Type Cutting Processing Services Meeting ANSI BSCHF 100 - 100MOQ: 1 Square Meter
-
Black Metal & ProductsNegotiableMOQ: 2500 Tons
-
Brass Coated Steel Cord for Making Tyre 2*0.30mm Belt/ Steel Conveyor Belt Steel Cord /Tear-Resistant Dipped Steel Cord Fabric for Conveyor BeltUS$ 1 - 200MOQ: 10 Kilometers
-
Find Similar Icon Safety Grating Walkway Anti-Skid Perforated Metal Plate With Crocodile Mouth Hole Cut Welded BendedUS$ 20 - 100MOQ: 1 Piece
-
Low Price Q195 Q235 A36 Carbon Steel Wire Annealed WireUS$ 400 - 1000MOQ: 1 Ton
-
Aluminium Foil /Lamination FoilUS$ 2,900 - 3,600MOQ: 20 Tons
-
GrilleNegotiableMOQ: 50 Pieces
-
Tungsten Heavy AlloyUS$ 1 - 1,000MOQ: 5 Kilograms
