Super Scanner Hand Held Metal Detector for Security(GC-1001)
Specifications
Hand Held Metal Detector1.Auto detects & light
2.With the earphone
3.Adjustable sensitivity
4.Reset switch operation
Super Scanner Hand Held Metal Detector for security(GC-1001)
Feartures:
1.With Elegant appearance,super sensitivity.
2.Adjustable Sensitivity,easy to use.
3.3 kinds of alarm methods:buzzer & LED alarm;viberation & LED alarm.
4.After installing chargeable battery (*Optional) in the battery compartment,you can chareg the device directly.
Function:
1.The battery lid can be opened by pushing backward with thumb at the concave groove.
2.Install the 9V battery according to the anode and cathode signs on the battery lid.
3.Cover with the battery lid and push forward firmly.
Operation:
1.Firstly,scanning the front body from the right shoulder,and move done to the right ankle,from the right ankle to the left,and move up to the left shoulder
2.Secondly,scanning the back body from the head,move aling the outline of the body,and over the left hand,the left leg,and move from the left ankle to the right ankle,then along the right leg and hand up to the right shoulder,from the neck move along the spine
3.While scanning the ankle and feet area,holding the detector level to the ground about 1~2 inches above the surface.When adetecting is being done near the ground,reduce the sensitivity
Sensitivity Adjustment:
1.The sensitivity shall be adjusted when performance instability is observed or sound is produced when detecting human body without any metal stuff because the detection distance is less than the stipulated requirement or the sensitivity is too high.
2.Rotate the Sensitivity Adjuster clockwise,until there is no sound from the Buzzer,then counter-clockwise barely to the position where a sound is produced,then rotate for another half a circle clockwise,until the sensitivity meets the requirement.
Detection distance:
The sensitivity of the detector is determined mostly by the size,shape and composition of the object to be detected.
Typical performance figures are given below:
Object:Sensitivity
Pin:30-60mm
One coin:75-100mm
6 inches knife:160-180mm
64 model hand gun:180-195mm
Note:
1.Be sure to switch off the power after use.If you are not going to use it for a while,take the battery out.
2.When use rechargeable battery,duration of charging is 5~6 hours.
3.Voltage of Charger:9~12V (DC). (*Charger is Optional)
4.Keep the metal detector dry and clean.Wipe off the detector by wet cloth,don't use the chemical detergent.
Send Inquiry to This Supplier
You May Also Like
-
High-Quality Galvanized Steel Wrought Iron Fence for Ornamental and Decorative UseNegotiableMOQ: 500 Meters
-
Solar Electronic Rodent Repellent, Ultrasonic Snake Repellent, Outdoor New Energy Repellent for Stray Dogs and Cats(Wechat:13510231336)US$ 9.5MOQ: 1000 Pieces
-
Diamond Metal Galvanized PVC Coated Chain Link FenceUS$ 9.5MOQ: 1 Square Meter
-
Safety & Anti-theft GuardrailNegotiableMOQ: 2000 Sets
-
Wrought Iron Garden Fence for Vineyard and Estate ProtectionNegotiableMOQ: 500 Square Meters
-
Chain Link Fence/ Diamond Metal Fencing/Chain Link Wire Fencing Project/ FENCE/pvc Coated Chain Link FenceUS$ 10MOQ: 1 Foot
-
Galvanized Round Yard Pen Panel for Horse, Sheep, and Cattle CorralNegotiableMOQ: 100 Pieces
-
Plastic Fence Post Top Cap for Pipe End Porch RailingNegotiableMOQ: 100 Pieces
-
High Quality Metal Bird Pigeon Trap Cage With Metal Wire Door Iron Animal TrapUS$ 23.00MOQ: 10 Pieces
-
ISO Standard 50KG Safe Working Load Scaffold Tool Lifting BagNegotiableMOQ: 1



