2016 fiberglass bathroom interior door
USD $20 - $50
/ Piece
1 Piece(Min.Order)
- 20000 Pair / Pairs per Month
- NINGBO OR SHANGHAI for fiberglass bathroom door
- T/T Credit Card PayPal
You May Like
Product Details
| Place of Origin: | Zhejiang, China | Brand Name: | OEM | Model Number: | White Oak Series |
| Open Style: | Swing | Position: | Interior | Surface Finishing: | Finished |
| Type: | Other, bathroom doors | Door Material: | Other, fiberglass door |
Product Description
ducts picture: fiberglass bathroom door
2.How To Order: fiberglass bathroom door
1. Lay door horizontally on saw horses or a table.
2. Remove all the hardware and mask off anything you don't want stained such as the glass insert.
3. DO NOT SAND GRAINED FIBERGLASS.
4. Wipe the door with mineral spirits to clean any dust or residue from the surface. Allow door surface to dry completely before applying stain.
2. Remove all the hardware and mask off anything you don't want stained such as the glass insert.
3. DO NOT SAND GRAINED FIBERGLASS.
4. Wipe the door with mineral spirits to clean any dust or residue from the surface. Allow door surface to dry completely before applying stain.
How To Strip The Stain
•Savogran SuperStrip™
•Kutzit™
•Dad's Easy Stripper™
•3-M Safest Strip®
NOTE: If selecting other products to strip the stain, make sure to read the warning against use on fiberglass.
•Kutzit™
•Dad's Easy Stripper™
•3-M Safest Strip®
NOTE: If selecting other products to strip the stain, make sure to read the warning against use on fiberglass.
How To Stain PF Frames
1. Lay jamb horizontally on saw horses or a table.
2. Remove all the hardware and mask off anything you don't want stained.
3. DO NOT SAND GRAINED PF FRAMES.
4.Wipe the jamb with mineral spirits to clean any dust or residue from the surface. Allow jamb surface to dry completely before applying stain.
2. Remove all the hardware and mask off anything you don't want stained.
3. DO NOT SAND GRAINED PF FRAMES.
4.Wipe the jamb with mineral spirits to clean any dust or residue from the surface. Allow jamb surface to dry completely before applying stain.
How To Paint Woodgrain Doors
1.Lay door horizontally on saw horses or a table.
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.DO NOT SAND GRAINED FIBERGLASS.
4.Wipe the door with mineral spirits to clean any dust or residue from the surface. Allow door surface to dry completely before applying stain paint. Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
5.Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6 sides. Doors which have been bored and morticed for hardware should be primed inside of the lock bore as well.
6.The primer must be completely dry before applying the topcoat.
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.DO NOT SAND GRAINED FIBERGLASS.
4.Wipe the door with mineral spirits to clean any dust or residue from the surface. Allow door surface to dry completely before applying stain paint. Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
5.Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6 sides. Doors which have been bored and morticed for hardware should be primed inside of the lock bore as well.
6.The primer must be completely dry before applying the topcoat.
How To Paint Wainscoting
1.Lightly sand the surface with a Scotch-Brite Pad or fine sandpaper.
2.Thoroughly wipe the wainscoting with water or an appropriate cleaner such as Sherwin-Williams Pro Clean Professional Prep Wash Concentrated Cleaner to clean any dust or residue from the surface. Acetone will also work well.
3.Allow wainscoting to dry before applying paint. Do not use hydro-carbon based solvents to clean the wainscoting, as such products may leave a residue.
2.Thoroughly wipe the wainscoting with water or an appropriate cleaner such as Sherwin-Williams Pro Clean Professional Prep Wash Concentrated Cleaner to clean any dust or residue from the surface. Acetone will also work well.
3.Allow wainscoting to dry before applying paint. Do not use hydro-carbon based solvents to clean the wainscoting, as such products may leave a residue.
How To Paint Smooth Skin Doors
1.Lay door horizontally on saw horses or a table.
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper.
4.Wipe the door with acetone to clean any dust or residue from the surface. Allow acetone to dry from the surface before applying
5.Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
6.Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6 sides. Doors which have been bored and morticed for hardware should be primed inside of the lock bore as well.
7.The primer must be completely dry before applying the topcoat.
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper.
4.Wipe the door with acetone to clean any dust or residue from the surface. Allow acetone to dry from the surface before applying
5.Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
6.Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6 sides. Doors which have been bored and morticed for hardware should be primed inside of the lock bore as well.
7.The primer must be completely dry before applying the topcoat.
How To Paint PF Frames
1.Lay jamb horizontally on saw horses or a table.
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper.
4.Wipe the jamb with mineral spirits t to clean any dust or residue from the surface. Allow to dry from the surface before applying paint. Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper.
4.Wipe the jamb with mineral spirits t to clean any dust or residue from the surface. Allow to dry from the surface before applying paint. Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
How To Trim A Trimmable Door
General trimming information
How To Measure A Rough Opening
Measure Your Entryway - for Prehung Units Only
How To Replace A Door Slab
Replacing a door is a project within the capabilities of most do-it-yourselfers. Throughout the installation, take care not to damage or disturb the door frame and trim. These instructions are general; always follow the manufacturer's directions for the specific product you are using. Your retailer will help you plan the project and advise you on what products are available to help.
How To Install A Dentil Shelf
Please read and understand all installation and adhesive instructions prior to opening the adhesive cartridge.
CAUTION: Make sure your work area is well-ventilated. Keep adhesive away from heat and flame. Avoid any contact with eyes and skin. Read warning label on adhesive box.
CAUTION: Make sure your work area is well-ventilated. Keep adhesive away from heat and flame. Avoid any contact with eyes and skin. Read warning label on adhesive box.
Sample Time & Charges
1. Sample Time |
1) Ready samples could be offered immediately |
2) Samples need to make based on client’s request, 7-10 days after getting sample charges. |
2. Transportation |
Samples can be sent by DHL/FEDEX/UPS/TNT/EMS etc according to client’s request. |
3. Sample Charges |
Samples could be charged depending on different items, refunded after order placed. |
Company Advantage
1). Fast Response We answer all inquiries quickly within 12 hours, whether they arrive via email, fax or letter. |
2). Competitive Prices Our large volumes of production allow us to offer excellent prices. |
3).Strict Quality Control We inspect all the goods before shipments to ensure that the quality is as guaranteed. |
2).Respect to Delivery We gain the greatest capability to ship on time and accurately with our computerized management system in the industry. All the deliveries will not exceed 30 day. |
3).Strong R&D Team We are always researching and developing innovative products to provide our clients with new opportunities in their markets. |
4).Professional After-Sales Service Regular order tracking & customer interaction make us build a good reputation in the worldwide markets. |
If you have interest with our products, Please stick the “Send” below.
Contact Us
- Eagleridge Enterprise (Hangzhou) Co., Ltd.
- Contact nameEagle Ridge
- Phone86-571-87755332
- AddressRm. 403, Block B, Bldg. 2, Xiyuan 8th Rd., Sandun Town, Xihu Dist. Hangzhou,Zhejiang
Product Categories
New Products
-
OEM Good price high quality Door hardware Aluminum Sliding Door Track Upper and Lower Track Set
-
Flexible hangar door
-
Industrial Automatic High Speed Stacking Door
-
Industrial Transparent Sectional Door
-
High Speed Fast Rolling Door for Clean Room
-
High Speed Roller Shutter Door for Cold Storage
-
Industrial PVC High Speed Rolling Shutter Doors
-
Intelligent segment sliding door Segmented sliding door Remote control electric retractable door
-
Hidden Frame Curtain Wall
-
Visible Frame Curtain Wall
-
PNS8352 Sliding Window
-
130 Series Sliding Patio Door
-
90 Sliding Door
-
Encoder POWEVER-PE-ENC-0608 A4PE200 electrical machineryA4Display board
-
wooden door
-
Wholesale Other 90 mins UL Exterior Entrance Safety Double Fireproof Steel Door Exit Fire Doors Fire Rated
-
Wholesale Sound Proof Security Doors Turkey Style Exterior Security Door for Apartment Building
-
Latest Design Solid Wood Door Design Bedroom Interior Painting Veneer Main Wooden Door
-
China Supplier Price Interior Room Water Proof Flush WPC Wood door for Apartment House Hotel
-
GYJ40 GYJ50 GYJ70 GYJ100 High Speed Door Motor for PVC folding door
-
GYJ40 GYJ50 GYJ70 GYJ100 High Speed Door Motor for PVC folding door
-
GYJ40 GYJ50 GYJ70 GYJ100 High Speed Door Motor for PVC folding door
-
Aluminium security Electric Rolling External Safely Roller Shutter Doors For Residential
-
Full WPC Door with Glass Interior Painted Door Water Proof Hollow Door Import
Popular Searches
Recommended Products
- Symons Steel-Ply Forming System Formwork for Concrete Construction
- TGGS75-400HDPE Plastic Geogrid Room Large Government Project River Maintenance and Reinforcement
- TGGS75-400HDPE Plastic Geogrid Room Large Government Project Parking Lot Roadbed Reinforcement
- TGGS75-400HDPE Plastic Geogrid Room Large Government Project Roadbed Laying and Reinforcement
- osha standard lvl scaffolding plank for Saudi Arabic Market
- HDPE plastic blind ditch 160mm, 200mm, 400mm landfill engineering seepage and drainage
- 2.20mm thick HDPE anti-seepage geotextile membrane with smooth surface inside the cement wastewater sedimentation tank liner
- Waste disposal site engineering anti-seepage 1.50mm thick HDPE geomembrane 8m wide smooth surface
- Root puncture resistant HDPE polyethylene geotextile waterproof membrane with a 1.25mm thick smooth surface
- HDPE rough geomembrane, 8 meters wide and 2.0mm thick landfill liner
- big size film faced plywood
- 100% birch plywood
Find Similar Products By Category
- Construction & Real Estate > Doors & Windows > Doors
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Eagle Ridge
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-