Large Abs Vacuum Formed Plastic Garbage Can

Specifications

Large abs Vacuum formed plastic garbage can

OEM &ODM are all acceptable

high quality,best price and service,

prompt delivery time 

Vacuum forming step:

Step1. Make the plastic sheet be clamped into position which above the

vacuum forming mold inside the vacuum forming machine.

Step 2

The sheet is then heated by two heaters one above the sheet and one below the sheet.

This method is called sandwich heating and gives a more consistent temperature

throughout the sheet avoiding any cold areas which in turn gives you a sharper and

more defined vacuum forming .

 Step 3

Once the sheet is heated to the correct temperature it will become pliable, the 

vacuum forming mold is raised and a vacuum is applied which pulls the now

malleable plastic sheet down onto the vacuum forming mold.

Step 4

The vacuum is kept on while the plastic is cooled using large fans and water spray so

that it retains the shape off the vacuum forming mold.

Step 5

Once the plastic is cooled the vacuum is released and the plastic part removed by

gently applying a short blast of air between the vacuum forming mold and the plastic

component.

Step 6

Pick the plastic sheet which is finished vacuum forming out from the vacuum forming

machine.

Step 7

Cut the edge by CNC machine or hand.

Step 8

Cleanning and packing.

Preview of amei brothers