YFMA 520 automatic adhesive laminating machine

Specifications

adhesive laminating machine YFMA 520 Automatic Laminating Machine (Feeder & Separator Equipped)

adhesive laminating machine

Features:

 

1.adopping automatic feeder, so that  the feeding ,laminating ,separating can totally inline for laminating job.
2.the overlap use servo –motor control , when operating the machine just need to set the paper length on   touch screen, the machine can run automaticlly , the overlap  tolerance is about  ±2mm.
3.the heating roller is use heat transfer oil, the temprature meter is inside the oil, not touch with the roller surface, so that get the accurate temprature. 
4.Adop the jogger for collecting the paper, after pneumatic separating paper can collect well with the vibrating table ,no need extra people for collection.
5.use pneumatic  pressure, and can get bigger pressure ,and easier for usual maintance.
6.the main electrical prodcuts use import and taiwan produce, to make sure the stable for running the machine.
7.use the anti-curve for thin paper, make sure the thin paper after laminating is not decline and difficult for paper collection.
8.the film loading is using the air shaft ,easy loading , the film feeding use pneumatic brake blocked, have very stable tension.

 

Specification:

Model	YFMA520
Feeding	Automatic
Separation	Screen setting automatically
Paper	90 – 450gsm, 500*750mm width 75cm length 70cm feeder can do this max. But for biggest size paper weight need more than 125g.
Feeder`s load capacity	√
Laminating roller surface	Silicone
Suitable for format	B1, B2, B3, A4 and so on
Max. paper wide X length	500mmx720mm
Speed control	0~30m/min
Max. performance	B2: 2600pcs/h
Temperature control	60 - 140°C
Power supply	380v 50HZ 3 P/220V 60HZ 3P/ 220V 50hz 2 p
Power	With compressor 11kw
Machine demmension (w*l)	195*120*140cm
Machine Weight	650kg
Modular Stand	√
Reception Unit	√
Jogger	Optional
Machine size	2570X1210X1200
Machine weight	500kgs