2014 new arrived 36W nail uv lamp&36W UV Lamp,UV Gel Lights

Specifications

36W Nail UV Lamp

Nail Curing UV Lamp For Nail dry 

Specifications

Our company, specializes in the manufacture and export of the entire range of nail products including Nail Art, Nail Sticker, Nail Tip, UV Gel System, UV Lamps, Nail Art Kits, and other Nail Equipment.  Established in 1995, we have worked with major wholesalers and retailers across the world and pride ourselves in the repeat business we achieve with these customers.  We are ready for your order, large or small, and can do OEM orders as well.  We are eager for your business! For more informations, please visit our website

Description:

Professional Uv nail curing lamp ,45w UV lamp cures gel fast as little as 120seconds ,Leave nails with a beautifully smooth even finish .

1)Power:45w

2)Voltage:100v---120v    50-60HZ          220V---240V       50-60HZ

3)Measurement:68.5*43*53CM    Quantity:  6 pcs/ctn  

4)  N.W/G.W: 13.8KGS/ 15KGS

 5)Wavelength:370nm

6)Automatic timer:120 seconds ,180 seconds ,240 seconds ,300seconds.

Usage:

Be sure the uv bulb and every parts fix well before using it

1)Power on,press the ON/OFF switch at the back . the power button red.

2)Press the Model ,Select the timer ,then press the start ,the machine starts to work ,or press the start directly ,the machine stars to work .

3)It will stop when time's up.

4)Using 5*9w uv bulb,please replace the uv bulb every 6 months ,before replacing the bulb be sure to turn the lamp off.

Notice:

1)Use the correct power  source voltage.

2)Please keep the uv lamp clean.

3)Don't stare at the UV bulb straightly .

4)In order to keep the efficiency ,please operate according to the gel manual ,Don't shorten or use over time .

5)Keep  away from kids.

Technical data:

Power input:      4 x 9 Watt

Operating nominal voltage of the tubes:  70 Volt / 50Hz

Primary stress of the chokes/mains voltage: 230 Volt

(We can also produce 110V according to your request.)

Start-up:

Push mains plug into socket (220V-240V/50Hz).

Press operating switch (red switch) at the back of the machine.

The tubes switch off automatically after about 2 minutes.

Shutdown:

Disconnect lamp from the mains supply when not in use (pull plug Out of the socket).

Appropriate handling:

Place your hand in the lamp.When working with UV gels,please follow the instructions of the gel supplier.In general, the length of radiation needed to harden a UV gel in layer of 2-3 mm thick is approx 120 seconds

If a technically perfect gel does not harden sufficiently, it may be necessary to replace the fluorescent tubes.We recommend that our specialists carry out the replacement.if not,we recommend the following procedure:

Fist switch off the lamp and pull the plug out of the socket.Pull the tubes out of the plug- in socket along the longitudinal axis(snap-in lock) and then put the new tubes in accordingly.The tubes must fit into place with an audibe snap.please dispose of the old fluorescent tubes in the containers especially provided.

Packing detail:

12pcs/ctn

UV lamp

nail gel uv lamp
1.36W UV lamp
2.12 pcs  uv lamp/ carton
3.also have 12w, 16w,18w,36w,42w  uv lamp
4.offer CE , ROHS and so on

5.packing size :540*480*240

6.Power requirement : 110v - 220 v

1. Power: 36Watt
2. Use 4*9Watt Bulbs
3. Profession Lamp for Salon
4. Suitable for fingernails and toenails