D-30B 5V Dual Output Switching Power Supply
Specifications
switching power supply:1.low price and high efficiency
2.CE certificate.
3High efficiency and low operation temperature
Switch power supply
|
Model Performance |
D-30A |
D-30B |
||
CH1 |
CH2 |
CH1 |
CH2 |
|
DC Output Voltage |
5V |
12V |
5V |
24V |
Output voltage tolerance(Note 2) |
±2% |
+3,-7% |
±2% |
+3,-5% |
Rated output current |
4A |
1A |
2.2A |
1A |
Output current range |
0.5-4A |
0.1-1A |
0.5-4A |
0.1-1A |
Ripple and noise(Note 3) |
50mVp-p |
100mVp-p |
50mVp-p |
100mVp-p |
Inlet stability(Note 4) |
±0.5% |
±1% |
±0.5% |
±1% |
Load stability(Note 5) |
±0.5% |
±4% |
±0.5% |
±4% |
DC output power |
32W |
75W |
||
Efficiency |
72% |
74% |
||
DC voltage adjustable range |
CH1+10,-5% |
CH1;+10,-5% |
||
Input voltage range |
85~132VAC/170~264VAC;choice by switch 47~63Hz;240-370VDC |
|||
Input current |
0.8A/115V 0.45A/230V |
|||
|
|
|||
Leakage Current |
<0.5mA/240VAC |
|||
Overload protection |
105%~150% type:FOLDBACK cut off output reset:Automatic recovery |
|||
over-voltage protection |
…… |
|||
High temperature protection |
…… |
|||
temperature coefficient |
±0.03%°C(0~50°C) ON+5V |
|||
Start-up,upper,rentention time |
200ms,50ms,30ms |
|||
shock resistance |
10~500Hz,2G 10min./1circle,time:60min.,axes |
|||
Withstand |
Input to Output Internal:1.5KVAC,iutput shell:1.5KVAC,output:0.5KVAC |
|||
Insulation Resistance |
Input to Output Isolation,Input&out shell,output&out shell:0500VAC/100M Ohms |
|||
|
work Temperature/ humidity |
-10°C~+60°C,20%~90%RH |
|||
Storage Temperature,temperature |
-20°C~+85°C,10%~95RH |
|||
Outline dimension |
129*98*38mm |
|||
Weight |
0.4Kgs |
|||
Safety standards |
Satisfy UL1012 REQUIREMENT (NOT QPPLY FOR THE MARK) |
|||
EMC Standard |
Meet FCC part15 J Conduction class A |
|||
|
Note: 1.The above parameters test conditions: 230VAC input, rated load, 25 °C 70% RH. Humidity. 2.Tolerance: includes set up tolerance, line stability and load stability (Note 5). 3.The ripple test:20MHz with A12 "twisted pair, interrupted with a 0.1uF & 47uF capacitor circuit. 4.The incoming line voltage stability test: the minimum full load voltage of the incoming line to the highest voltage. 5.Load stability test: the load from 0% to 100%.Others output is 60% rated load. 6.Each output can reach max current,but the total load can't over the max output power. | ||||
Send Inquiry to This Supplier
You May Also Like
-
ALLEN-BRADLEY Power Supply XL 120 W 1606-XL120DRNegotiableMOQ: 1 Piece
-
5V 12V 25W Power Supply With Overload Protection for Industrial AutomationNegotiableMOQ: 100 Pieces
-
ANDW Series Pure Sine Wave InverterNegotiableMOQ: 1 Set
-
Switching Power SupplyNegotiableMOQ: 2700 Pieces
-
Scrap Recycle Computer Hardware Untested Computer Power SuppliesNegotiableMOQ: 10000 Pieces
-
CX-9001 1KVA Knob Type Variable AC Power Supply Unit of Single Phase Input and Single Phase OutputNegotiableMOQ: 1 Piece
-
Universal Travel Adapter&power Power Converter Adapter Power SupplyUS$ 100 - 5,000MOQ: 10 Sets
-
Hot Sales 5050 Smd Led Strip Power SupplyUS$ 0.78 - 1.5MOQ: 1000 Poles
-
(DC Power Supply) QJ12003E 100% Original&New!!NegotiableMOQ: 1 Set
-
TS-001 Mini Circuit Breaker 12V Power Supply Din Rail ChannelNegotiableMOQ: 100 Pieces


