Middle/big dog Spray corrective collars for dogs with CE

SP-10 Safety corrective collars for dogs

Spray bark control collar Main Features:

1. LED power indication

2. Water resistant design

3. Low power consumption

4. Record the total spray times automatically when you turn off the collar

5. The device is safety and no negative impact or hurt to your pets

 Bark spray collar Spec

Spray bark control collar Operation Instruction:

A: Before use

Confirm the battery to be inserted correctly

Press and hold on the On/Off button to turn the collar on

B: How to use

1. Place the spray collar on your dog’s neck close to the ears.

2. The spray collar should fit snugly, yet loose enough to allow one finger to fit under the strap.

3. Make sure the Spray Nozzle is angled out and pointing up towards the dog’s snout. For long haired dogs , It may be necessary to trim the neck hairs along the spray path

4. Ensure the Refill Port is clean . If any dirt or debris enter the refill port , please clean the port before each fill

5. Hold the Spray can upright and firmly press the nozzle down into the Refill Port . Hold for 15 seconds and remove

6. The device will eject spray automatically when detect the dog barking . The collar spray 1 time if the dog’s barking is continuous without interval over 2 seconds.

7. The device will return to the original status if it can’t detect the barking for 30 seconds.

8. The device is safety and no negative impact or hurt to your pets.

9. The Red LED will flashes to indicate the total spray times when you turn off the collar . For example , if the total spray times is 3 , the Red LED will flash 3 times once the collar power off .

Spray bark control collar CE & ROHS:

SP-10 Spray bark control collar pictures: