pensky-martens closed cup flash point tester applies to ASTM D93

Scope of application

Applied standards: GB/T 261-2008, ASTM D93-02

Application range: applies to the determination of flash point of petroleum products. This product can measure the flash point of petroleum products in the range of 40-370°Cas required by the standards.

Function characteristics

1, According to GB / T 261-2008 standard for different types of samples A andB two experimental procedures to choose from;

2, Innovation introduced the U.S. imports XECOM data processing chip, fast and accurate processing of the data;

3, Innovative use of the furnace tilting system automatically experiment after the furnace cooling rate faster greatly shorten the time interval between the repeated experiments;

4, The instrument has a self-diagnostic function, automatic prompts to equipment failure;

5,The instrument has self over-temperature protection, over-Measuring range can be arbitrarily set;

6, color liquid crystal display, real-time simulation of real-time trace shows a function of time warming up and test curve, operator interface prompts;

Technical parameters

1 Power supply: AC 220V ± 10%, 50Hz (also can be customized to 110V)

2,Range: room temperature ~ 300 ° C;

3, Repeatability:  2 ° C;

4,Reproducibility:  4 ° C The visibility: 0.1 ° C;

5, Accuracy: 0.5 ° C;

6, Heating rate: meet GB/T261-2008 standard

7 Ignition way: electronic ignition gas flame

8, Ambient temperature :10-40 ° C;

9, Adapt to the environment humidity: <85%

10 Total power consumption: not more than 300W “

1.We are a gold supplier on Alibaba platform. If you want to purchase our products but worry about the quality or other issues, you can place order on Alibaba with us. You’ll get up to USD7,000.00 Alibaba Trade Assurance to protect your payments.

2.You'll get one year warranty about our products.

3.We'll provide operating videos to you and give you continuous technology support.

4.We'll test the instruments before delivery to ensure their quality .

1. What's the warranty?

Normally 12 months

 2.Does the power supply can customized?

YES ,if you need customized power supply,pls tell us when you put the order.

 3.What's the production time?

Usually 20 days for production, some equipments need extra time to debug.

 4.What's the Dlivery method ?

Light-weight cargo is usually by express , Air transport and sea shipping is acceptable (provide with safty packing)

 5.What's the delivery time?

According to different method and country , express will be 6~15 days

 6. How to install and operate?

According to each instruction manual which sent with equipment. ( We also provide after-sale technical support)

 7.What's the payment term?

Normally 30% paid by T/T in advance and 70% paid by T/T before shipping by air.Other payment term is negotiable

FDT-0132 Automatic open cup flash point tester                                 FDT-0233 low temperature closed cup flash point tester