A Large Fence For Hens/ FRP Fence

In bulks, woven bags, plywooden case, containers, which suitable for the frp fence.

Specifications

1.Anti-corrosion
2.Light Weight
3.Low Maintenance
4.FRP fence for hens and animal husbandry.

A Large Fence For Hens/ FRP Fence

 

The fence is assembled by the frp pultrusion tubes, frp mould tee joints, stones, elbows. It has the characters such as light weight, high strength, low maintenance and can be easy design.

 

The frp fence tube specifications are 36mm in OD and 25mm in ID and 50mm in OD and 42mm in ID at present.

 

Pultrusion profile is a kind of compound materials which is formed by taking fiberglass as the reinforced material, and taking thermosetting resin as base, the fiberglass continuous roving enable the product to have the extremely high longitudinal strength, the fiberglass mat (continuous strand mat, knitted mat and so on) makes the product have the good transverse strength. The thermosetting resin base is usually the unsaturated polyester resin, the vinly resin, or the epoxy resin and the phenolic resin, the resin base enable the product to have the good anti-corrosion property, the different resin enables the product to be suitable for various corrosion environment, to add the ultraviolet inhibitor and fire retardant may enable the product to have the outstanding anti-aging property and the different rank anti-flammable property.

 

Add the nexus mat on the product surface could make it obtain best corrosion-resistance and anti-ageing properties. The fiberglass content in piltrusion profile is usually 45%-75% (weight ratio), the balance is resin and additive. Unsaturated polyester resin and vinly resin are the most commonly used resin base.

 

Pultrusin is a continuous process to produce the random length FRP profiles with alike section, first to get the fiberglass continuous roving and mat on creels through the resin bath under the traction of pultrusion machine, then take shape through a pre-molding with a kind of section shape, and cured by heating die and finally cooling and auto-sawing.

 

Pultrusion process is a kind of advanced mechanized compound materials molding process, which has the small environmental pollution, high production efficiency, small cutting loss and no waste leftover material, it could produce random length FRP profiles eith the alike section.